[OmniOS-discuss] OmniOs install fails on dell R820

[Eric Sproul]

Ram,
You may not need to rebuild the ISO just yet, although maybe you have since
your last message... Sometimes a driver may work fine for a given device if
it's similar enough to others that are already supported, and all that's
required is to get the driver to bind to the new device.  The
update_drv(1M) command is what we use to modify driver configuration.
 There are lots of examples on the web, but it would probably go something
like:

update_drv -a -i 'pciNNNN,NNNN' mr_sas
update_drv -f mr_sas

Where NNNN,NNNN is the pci vendor ID and device ID.  You can get those by
picking through the output of 'prtconf -pv' and looking for a string like
'Serial Attached'.  I took a quick look at our pci.ids file for the 710
specifically:

# gzgrep H710 /usr/share/pci.ids.gz
                1028 1f30  PERC H710 Embedded
                1028 1f31  PERC H710P Adapter
                1028 1f33  PERC H710P Mini (for blades)
                1028 1f34  PERC H710P Mini (for monolithics)
                1028 1f35  PERC H710 Adapter
                1028 1f37  PERC H710 Mini (for blades)
                1028 1f38  PERC H710 Mini (for monolithics)

That might give you a leg up.  I've also made a note to add the lspci
utility to the ISO and Kayak miniroots, since that's useful in cases like
yours.

Eric


On Fri, Dec 21, 2012 at 7:47 AM, Ram Chander <ramquick at gmail.com> wrote:

> Tried "bloody" ISO too but still same error.
> I  have downloaded a driver from below and want to include it in a  ISO -
> any idea how to include this and rebuild ISO ?
>
> http://blog.infrageeks.com/
>
>
> On Thu, Dec 20, 2012 at 8:16 PM, Eric Sproul <esproul at omniti.com> wrote:
>
>> On Thu, Dec 20, 2012 at 4:49 AM, Ram Chander <ramquick at gmail.com> wrote:
>> > Hi,
>> >
>> > I have 8 disks in Raid0 in Dell Poweredge R820.  It has Perc H710 raid
>> card.
>> > When I tried to install latest Omnios,  it fails with below error.  It
>> fails
>> > to recognize any disks.
>> >
>> > "OmniOS cannot be installed on any disk"
>> >
>> > Any pointers on how to get drivers fixed and install OmniOs ?
>>
>> Hi Ram,
>> I believe the H710 is a Dell-branded LSI 2208-based card.  Support for
>> the 2208 is a recent integration in illumos
>> (https://www.illumos.org/issues/3178), so can you try the unstable
>> ("bloody") ISO instead?  I believe the fix for issue 3178 didn't
>> integrate until after our most recent stable release.
>>
>> Eric
>> _______________________________________________
>> OmniOS-discuss mailing list
>> OmniOS-discuss at lists.omniti.com
>> http://lists.omniti.com/mailman/listinfo/omnios-discuss
>>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://omniosce.org/ml-archive/attachments/20121231/67ba0ad4/attachment.html>