[OmniOS-discuss] SLC SSD connected via SAS expander

[Hafiz Rafibeyli]

Hello ,i'm running omnios(d3950d8) as a NAS  base with napp-it,

hardware is Supermicro SC846E26-R1200B+LSI SAS 9211-8i HBA(IT mode enabled with last firmware)

everything working great,but i'm getting errors with my Intel SLC SSD 32GB(zil log).

SLC SSD connected to system backplane  via supermicro 2,5 to 3,5 converter.

I read somewhere Intel's SLC SSD not supported when  connected via SAS expander,anyway to solve this problem?

messages from /var/adm/messages

Jun 14 10:03:45 canomnios scsi: [ID 107833 kern.warning] WARNING: /pci at 0,0/pci8086,340e at 7/pci1000,3020 at 0 (mpt_sas0):
Jun 14 10:03:45 canomnios 	Disconnected command timeout for Target 16
Jun 14 10:03:45 canomnios scsi: [ID 365881 kern.info] /pci at 0,0/pci8086,340e at 7/pci1000,3020 at 0 (mpt_sas0):
Jun 14 10:03:45 canomnios 	Log info 0x31140000 received for target 16.
Jun 14 10:03:45 canomnios 	scsi_status=0x0, ioc_status=0x8048, scsi_state=0xc
Jun 14 10:03:45 canomnios scsi: [ID 365881 kern.info] /pci at 0,0/pci8086,340e at 7/pci1000,3020 at 0 (mpt_sas0):
Jun 14 10:03:45 canomnios 	Log info 0x31140000 received for target 16.
Jun 14 10:03:45 canomnios 	scsi_status=0x0, ioc_status=0x8048, scsi_state=0xc
Jun 14 10:06:15 canomnios scsi: [ID 107833 kern.warning] WARNING: /pci at 0,0/pci8086,340e at 7/pci1000,3020 at 0 (mpt_sas0):
Jun 14 10:06:15 canomnios 	Disconnected command timeout for Target 16
Jun 14 10:06:15 canomnios scsi: [ID 365881 kern.info] /pci at 0,0/pci8086,340e at 7/pci1000,3020 at 0 (mpt_sas0):
Jun 14 10:06:15 canomnios 	Log info 0x31140000 received for target 16.
Jun 14 10:06:15 canomnios 	scsi_status=0x0, ioc_status=0x8048, scsi_state=0xc
Jun 14 10:06:15 canomnios scsi: [ID 365881 kern.info] /pci at 0,0/pci8086,340e at 7/pci1000,3020 at 0 (mpt_sas0):
Jun 14 10:06:15 canomnios 	Log info 0x31140000 received for target 16.
Jun 14 10:06:15 canomnios 	scsi_status=0x0, ioc_status=0x8048, scsi_state=0xc