[OmniOS-discuss] OmniOS-discuss Digest, Vol 15, Issue 17

Richard Elling richard.elling at richardelling.com
Fri Jun 14 16:53:11 EDT 2013


On Jun 14, 2013, at 11:50 AM, Hafiz Rafibeyli <rafibeyli at gmail.com> wrote:

> Saso thank you for help,
> 
> yes SSD is Sata(Intel X25-E Series 32 GB),i will look for LSI interposer,

There was a firmware change between the X25-E gen1 and gen2 that also enters
the equation. The older SSDs were particularly susceptible to problems that 
ultimately cause a timeout/reset.
 -- richard

> 
> I have also Intel 520 Series 120 GB Sata SSD for Read Cache(L2ARC),but they work with SAS expander without any problem.
> 
> regards
> 
> Hafiz
> 
> 
> 
> 
> 
> ----- Orijinal Mesaj -----
> Kimden: omnios-discuss-request at lists.omniti.com
> Kime: omnios-discuss at lists.omniti.com
> Gönderilenler: 14 Haziran Cuma 2013 19:00:01
> Konu: OmniOS-discuss Digest, Vol 15, Issue 17
> 
> Send OmniOS-discuss mailing list submissions to
> 	omnios-discuss at lists.omniti.com
> 
> To subscribe or unsubscribe via the World Wide Web, visit
> 	http://lists.omniti.com/mailman/listinfo/omnios-discuss
> or, via email, send a message with subject or body 'help' to
> 	omnios-discuss-request at lists.omniti.com
> 
> You can reach the person managing the list at
> 	omnios-discuss-owner at lists.omniti.com
> 
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of OmniOS-discuss digest..."
> 
> 
> Today's Topics:
> 
>   1. New system/zones/brand/ipkg package released (Dale Ghent)
>   2. Updated release: r151006g (Eric Sproul)
>   3. SLC SSD  connected via SAS expander (Hafiz Rafibeyli)
>   4. Re: SLC SSD  connected via SAS expander (Saso Kiselkov)
> 
> 
> ----------------------------------------------------------------------
> 
> Message: 1
> Date: Thu, 13 Jun 2013 12:14:26 -0400
> From: Dale Ghent <daleg at omniti.com>
> To: "omnios-discuss at lists.omniti.com"
> 	<omnios-discuss at lists.omniti.com>
> Subject: [OmniOS-discuss] New system/zones/brand/ipkg package released
> Message-ID: <24624653-6CC1-46B6-9FE3-2919432C7378 at omniti.com>
> Content-Type: text/plain; charset=us-ascii
> 
> 
> A update to system/zones/brand/ipkg was released today which addresses the zone cloning issues detailed in http://omnios.omniti.com/ticket.php/11
> 
> If you've been vexed by this problem, here's your fix. 
> 
> http://pkg.omniti.com/omnios/release/info/0/pkg%3A%2F%2Fomnios%2Fsystem%2Fzones%2Fbrand%2Fipkg%400.5.11%2C5.11-0.151006%3A20130613T155331Z
> 
> /dale
> 
> ------------------------------
> 
> Message: 2
> Date: Thu, 13 Jun 2013 13:29:15 -0400
> From: Eric Sproul <esproul at omniti.com>
> To: omnios-discuss <omnios-discuss at lists.omniti.com>
> Subject: [OmniOS-discuss] Updated release: r151006g
> Message-ID:
> 	<CA+QY2RSsDUKudzR1n4gjYyoS5GbM1jy0dOhUhoGjbig1zt7kzA at mail.gmail.com>
> Content-Type: text/plain; charset=ISO-8859-1
> 
> Weekly release r151006g fixes zone cloning and updates pci.ids:
> 
> http://omnios.omniti.com/wiki.php/ReleaseNotes#r151006g
> 
> 
> ------------------------------
> 
> Message: 3
> Date: Fri, 14 Jun 2013 10:08:43 +0300 (EEST)
> From: Hafiz Rafibeyli <rafibeyli at gmail.com>
> To: omnios-discuss at lists.omniti.com
> Subject: [OmniOS-discuss] SLC SSD  connected via SAS expander
> Message-ID:
> 	<27086425.4794979.1371193723429.JavaMail.root at cantekstil.com.tr>
> Content-Type: text/plain; charset=windows-1254
> 
> Hello ,i'm running omnios(d3950d8) as a NAS  base with napp-it,
> 
> hardware is Supermicro SC846E26-R1200B+LSI SAS 9211-8i HBA(IT mode enabled with last firmware)
> 
> everything working great,but i'm getting errors with my Intel SLC SSD 32GB(zil log).
> 
> SLC SSD connected to system backplane  via supermicro 2,5 to 3,5 converter.
> 
> I read somewhere Intel's SLC SSD not supported when  connected via SAS expander,anyway to solve this problem?
> 
> messages from /var/adm/messages
> 
> Jun 14 10:03:45 canomnios scsi: [ID 107833 kern.warning] WARNING: /pci at 0,0/pci8086,340e at 7/pci1000,3020 at 0 (mpt_sas0):
> Jun 14 10:03:45 canomnios 	Disconnected command timeout for Target 16
> Jun 14 10:03:45 canomnios scsi: [ID 365881 kern.info] /pci at 0,0/pci8086,340e at 7/pci1000,3020 at 0 (mpt_sas0):
> Jun 14 10:03:45 canomnios 	Log info 0x31140000 received for target 16.
> Jun 14 10:03:45 canomnios 	scsi_status=0x0, ioc_status=0x8048, scsi_state=0xc
> Jun 14 10:03:45 canomnios scsi: [ID 365881 kern.info] /pci at 0,0/pci8086,340e at 7/pci1000,3020 at 0 (mpt_sas0):
> Jun 14 10:03:45 canomnios 	Log info 0x31140000 received for target 16.
> Jun 14 10:03:45 canomnios 	scsi_status=0x0, ioc_status=0x8048, scsi_state=0xc
> Jun 14 10:06:15 canomnios scsi: [ID 107833 kern.warning] WARNING: /pci at 0,0/pci8086,340e at 7/pci1000,3020 at 0 (mpt_sas0):
> Jun 14 10:06:15 canomnios 	Disconnected command timeout for Target 16
> Jun 14 10:06:15 canomnios scsi: [ID 365881 kern.info] /pci at 0,0/pci8086,340e at 7/pci1000,3020 at 0 (mpt_sas0):
> Jun 14 10:06:15 canomnios 	Log info 0x31140000 received for target 16.
> Jun 14 10:06:15 canomnios 	scsi_status=0x0, ioc_status=0x8048, scsi_state=0xc
> Jun 14 10:06:15 canomnios scsi: [ID 365881 kern.info] /pci at 0,0/pci8086,340e at 7/pci1000,3020 at 0 (mpt_sas0):
> Jun 14 10:06:15 canomnios 	Log info 0x31140000 received for target 16.
> Jun 14 10:06:15 canomnios 	scsi_status=0x0, ioc_status=0x8048, scsi_state=0xc
> 
> 
> 
> 
> ------------------------------
> 
> Message: 4
> Date: Fri, 14 Jun 2013 08:27:55 +0100
> From: Saso Kiselkov <skiselkov.ml at gmail.com>
> To: omnios-discuss at lists.omniti.com
> Subject: Re: [OmniOS-discuss] SLC SSD  connected via SAS expander
> Message-ID: <51BAC5FB.2090001 at gmail.com>
> Content-Type: text/plain; charset=ISO-8859-1
> 
> On 14/06/2013 08:08, Hafiz Rafibeyli wrote:
>> Hello ,i'm running omnios(d3950d8) as a NAS  base with napp-it,
>> 
>> hardware is Supermicro SC846E26-R1200B+LSI SAS 9211-8i HBA(IT mode enabled with last firmware)
>> [..snip..]
>> Jun 14 10:06:15 canomnios 	Log info 0x31140000 received for target 16.
>> Jun 14 10:06:15 canomnios 	scsi_status=0x0, ioc_status=0x8048, scsi_state=0xc
> 
> If it's a SATA SSD, I'd recommend attaching it via a SAS interposer
> (AOC-LSISS9252). Running the SATA over a SAS backplane is just asking
> for trouble (without one I've had expander lockups necessitating a full
> powercycle of the machine). You may need to do some drilling and
> mechanical adjustments of your 2.5-to-3.5 adapter plates in order to
> accommodate the interposer, but it can be done.
> 
> Cheers,
> -- 
> Saso
> 
> 
> ------------------------------
> 
> _______________________________________________
> OmniOS-discuss mailing list
> OmniOS-discuss at lists.omniti.com
> http://lists.omniti.com/mailman/listinfo/omnios-discuss
> 
> 
> End of OmniOS-discuss Digest, Vol 15, Issue 17
> **********************************************
> 
> 
> _______________________________________________
> OmniOS-discuss mailing list
> OmniOS-discuss at lists.omniti.com
> http://lists.omniti.com/mailman/listinfo/omnios-discuss

--

Richard.Elling at RichardElling.com
+1-760-896-4422



-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://omniosce.org/ml-archive/attachments/20130614/24397368/attachment-0001.html>


More information about the OmniOS-discuss mailing list