[OmniOS-discuss] OmniOS install on HP DL360g8

[Eric Sproul]

Perhaps the cpqary3 driver update was only done to the installer's
ramdisk environment and not also to the installed pool?

On Thu, May 23, 2013 at 12:30 PM, Aleš Jagrič, Fora d.o.o.
<ales.jagric at forum-racunalnistva.eu> wrote:
> Thanks for the input but that did not help, I have tried something similar
> before, the error message returned was the same.
>
>
>
> P.S.
>
> The rpool mounts perfectly fine with the live cd, this is a fresh install on
> this hardware, it’s not ported from anywhere.
>
>
>
> Unless I’m missing something.
>
>
>
> From: Dale Ghent [mailto:daleg at omniti.com]
> Sent: Thursday, May 23, 2013 5:33 PM
> To: Aleš Jagrič, Fora d.o.o.
> Cc: omnios-discuss at lists.omniti.com
> Subject: Re: [OmniOS-discuss] OmniOS install on HP DL360g8
>
>
>
>
>
> The phys_path attribute in your disk label for your rpool needs to be
> updated, as it sounds like the rpool was created on different hardware which
> had different device paths than the machine you're trying to boot on here.
>
>
>
> A quick way to fix this is to boot off the install CD or USB image and:
>
>
>
> zpool import -R /a -f rpool
>
>
>
> That action alone will update the attribute and you should then be able to
> boot normally.
>
>
>
> /dale
>
>
>
>
>
> On May 23, 2013, at 11:10 AM, Aleš Jagrič, Fora d.o.o.
> <ales.jagric at forum-racunalnistva.eu> wrote:
>
>
>
> Hey,
>
>
>
> We're testing a new hardware deployment and we're having some trouble with
> this server type.  The cpqary3 driver included with the omnios stable is
> obsolete, and I replaced it in the shell before the install.
>
>
>
> The server is a HP DL 360 g8 with a P420i Smart array.
>
>
>
> OmniOS installs just fine after replacing the driver but after the initial
> reboot the kernel panics, with the error message (see attachment for
> screenshot hopefully it’s visible)
>
>
>
> NOTICE: Can not read the pool label from '/pci at 0,0/…./sd at 0,0:a'
> NOTICE: spa_import_rootpool: error 5
>
> ..
>
> ..
>
> .
>
>
>
> I’ve googled for similar errors but the fixes mentioned there had no effect
> (importing and exporting the pool from a live boot)
>
>
>
> I've tested with OmniOS OmniOS_Text_r151004, OmniOS_Text_r151006 and
> OmniOS_Text_bloody_20130208. The same image and procedure to replace the
> driver works just fine on a DL380g5 with a P400 controler.
>
>
>
> While the same procedure works just fine with openindiana 151a7. But I'm not
> willing to put openindiana in production.
>
>
>
>
>
> Any pointers how to solve this or what might be causing this?
>
>
>
> ________________________________
>
> This e-mail and any attachments may contain confidential and/or privileged
> information and is intended solely for the addressee. If you are not the
> intended recipient (or have received this e-mail in error) please notify the
> sender immediately and destroy this e-mail. Any unauthorized copying,
> disclosure or distribution of the material in this e-mail is strictly
> forbidden. E-mail message is scanned by Anti-Virus Software.
> <ilo.PNG>_______________________________________________
> OmniOS-discuss mailing list
> OmniOS-discuss at lists.omniti.com
> http://lists.omniti.com/mailman/listinfo/omnios-discuss
>
>
>
>
> ________________________________
> This e-mail and any attachments may contain confidential and/or privileged
> information and is intended solely for the addressee. If you are not the
> intended recipient (or have received this e-mail in error) please notify the
> sender immediately and destroy this e-mail. Any unauthorized copying,
> disclosure or distribution of the material in this e-mail is strictly
> forbidden. E-mail message is scanned by Anti-Virus Software.
>
> _______________________________________________
> OmniOS-discuss mailing list
> OmniOS-discuss at lists.omniti.com
> http://lists.omniti.com/mailman/listinfo/omnios-discuss
>