[OmniOS-discuss] Overheating faults with ST4000NM0023

[Schweiss, Chip]

I used Santools, which is a licensed product.

>From what I understand lsiutil and sg_buffer_write from sg3-utils can do it
too.  The mode for sg_buffer_write may need to be set to 7 instead of 5 as
stated in the firmware docs.

-Chip


On Fri, Apr 18, 2014 at 3:35 PM, Saso Kiselkov <skiselkov.ml at gmail.com>wrote:

> On 4/18/14, 9:23 PM, Schweiss, Chip wrote:
> > I've flashed 0004 to some of my Constellations so far.   The drives are
> > now set at a reference temperature of 60C which is much better than 40C.
> >
> > I had to disable mulltipathing to get these disks to flash.   I'm not
> > sure if this is an issue with the drive or the Supermicro JBOD.
> >
> > I disabled multipathing and I'm getting them to flash.
>
> I'm still trying to figure out how to flash them, as the flashing tools
> only seem to be available for Linux :(
>
> Guess I'm gonna have to ask the customer to take the machine offline for
> a while.
>
> Cheers,
> --
> Saso
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://omniosce.org/ml-archive/attachments/20140418/15c3154d/attachment.html>