[OmniOS-discuss] Not a UFS magic Number... Boot OmniOS installation on new Supermicro X10SAE

[Svavar Örn Eysteinsson]

Well, I've changed the disk from a brand new one, just opened it up from a static bag
inserted it, and the exact same error messages…. 

:S

so two disks, no boot….







On 12.1.2014, at 14:54, Saso Kiselkov wrote:

> On 1/12/14, 2:46 PM, Svavar Örn Eysteinsson wrote:
>> Hello.
>> 
>> I'm currently trying to install OmniOS on a brand new server.
>> Using the latest OmniOS build on USB stick with a SuperMicro X10SAE motherboard, and a XEON CPU.
>> 
>> When I have no SATA disk connected to the Intel SATA controller the installation boots up fine.
>> 
>> As soon as I plug a disk into the controller, it gives me the following errors at boot :
>> 
>> 
>> Probing for device nodes…
>> Preparing image for use
>> NOTICE : mount: not a UFS magic number (0x1c798c2e)
>> NOTICE : mount: not a UFS magic number (0x1c798c2e)
>> NOTICE : mount: not a UFS magic number (0x0)
>> NOTICE : mount: not a UFS magic number (0x1c798c2e)
>> Requesting System Maintenance Mode
>> Console login services cannot run.
>> 
>> Enter username for system maintenance….
>> 
>> 
>> My SATA disk is empty.
>> 
>> Does anyone know what the hell is going on ?
>> Are there any BOOT options on OmniOS installation? Can't find any information regarding boot options.
>> 
>> Any help would be much appreciated.
>> 
>> Thanks allot people.
> 
> Can you try dd'ing over the disk with zeros and trying again?
> 
> -- 
> Saso
> 
> _______________________________________________
> OmniOS-discuss mailing list
> OmniOS-discuss at lists.omniti.com
> http://lists.omniti.com/mailman/listinfo/omnios-discuss