[OmniOS-discuss] replace disk with difrferent model/size

[Fábio Rabelo]

Thanks a lot !

This user intent to replace the entire pool, so it is the best to change it
.

But I have no idea what I have to do so ...

Point me to a doc with this info and I will read and apply .

Many thanks again ....


Fábio Rabelo

2014-10-06 11:48 GMT-03:00 Schweiss, Chip <chip at innovates.com>:

> Looks like you are trying to add a 4K disk to pool with ashift=9.
>
> If the disk is a 512e disk you can force it to ashift=9 by adding an entry
> in sd.conf.  This will degrade write performance.   It's best to move the
> whole pool to ashift=12 (4K sectors) or find a 512b native disk.
>
> -Chip
>
> On Mon, Oct 6, 2014 at 6:46 AM, Fábio Rabelo <fabio at fabiorabelo.wiki.br>
> wrote:
>
>> Hi to all
>>
>> I have a system with failed hard disk .
>>
>> When I try to replace it, after 3 to 5 seconds "thinking"  the system
>> returns a msg like
>>
>> geometry mismatch error
>>
>> So, how can I replace a failed disk with another model or size ?
>>
>> This system uses 2 TB Hard disks, at first, I've installed 4 TB one,
>> after this geometry error I get a try with 2 TB model, same result .
>>
>>
>> Fábio Rabelo
>> _______________________________________________
>> OmniOS-discuss mailing list
>> OmniOS-discuss at lists.omniti.com
>> http://lists.omniti.com/mailman/listinfo/omnios-discuss
>>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://omniosce.org/ml-archive/attachments/20141006/c867bf5d/attachment-0001.html>