[OmniOS-discuss] Strange bge0 messages in syslog. interrupt, flags - not updated?
Davide Poletto
davide.poletto at gmail.com
Wed Apr 8 16:04:23 UTC 2015
Hi Svavar, that's interesting;
Just for reference/comparison I'm too have a (spare machine with only its
2GB ECC HP factory RAM module and 20131001 ROM BIOS) HP MicroServer G7 -
N40L - with the same onboard Broadcom Ethernet chip and I too upgraded
flawlessly from OmniOS 151012 to 151014 the day before yesterday but,
AFAIK, I can't see those bge0 notice logs.
Here latest (bge0 related) logs after a cold start:
Apr 8 17:20:40 nas01 genunix: [ID 469746 kern.info] NOTICE: bge0 registered
Apr 8 17:20:40 nas01 genunix: [ID 586369 kern.info] PCIE-device:
pci103c,705d at 0, bge0
Apr 8 17:20:40 nas01 genunix: [ID 236367 kern.info] PCI Express-device:
pci103c,705d at 0, bge0
Apr 8 17:20:40 nas01 genunix: [ID 936769 kern.info] bge0 is /pci at 0
,0/pci1022,9606 at 6/pci103c,705d at 0
Apr 8 17:20:41 nas01 genunix: [ID 801725 kern.info] NOTICE: bge0:
bge_mii_access: cmd 0x28390000 -- MI_COMMS_START set for 580 us;
0x24208000->0x4208000
Apr 8 17:20:41 nas01 genunix: [ID 801725 kern.info] NOTICE: bge0:
bge_mii_access: cmd 0x28390000 -- MI_COMMS_START set for 580 us;
0x243ca821->0x43ca821
Apr 8 17:20:41 nas01 genunix: [ID 801725 kern.info] NOTICE: bge0:
bge_mii_access: cmd 0x28390000 -- MI_COMMS_START set after transaction;
0x8390000->0x24370f08
Apr 8 17:20:41 nas01 genunix: [ID 801725 kern.info] NOTICE: bge0:
bge_mii_access: cmd 0x28390000 -- MI_COMMS_START set for 570 us;
0x24370f08->0x4370f08
Apr 8 17:20:41 nas01 genunix: [ID 801725 kern.info] NOTICE: bge0:
bge_mii_access: cmd 0x28390000 -- MI_COMMS_START set for 580 us;
0x24290300->0x4290300
Apr 8 17:20:41 nas01 genunix: [ID 801725 kern.info] NOTICE: bge0:
bge_mii_access: cmd 0x28390000 -- MI_COMMS_START set for 630 us;
0x24201200->0x4201200
Apr 8 17:20:43 nas01 genunix: [ID 801725 kern.info] NOTICE: bge0:
bge_check_copper: link now down speed 0 duplex 0
Apr 8 17:20:44 nas01 genunix: [ID 801725 kern.info] NOTICE: bge0:
bge_check_copper: link now up speed 1000 duplex 2
Apr 8 17:20:44 nas01 genunix: [ID 435574 kern.info] NOTICE: bge0 link up,
1000 Mbps, full duplex
prtconf -d
System Configuration: Oracle Corporation i86pc
Memory size: 2016 Megabytes
System Peripherals (Software Nodes):
i86pc
scsi_vhci, instance #0
pci, instance #0
pci103c,1609 (pciex1022,9601) [Advanced Micro Devices, Inc. [AMD]
RS880 Host Bridge] (driver not attached)
pci103c,9602 (pciex103c,9602) [Hewlett-Packard Company unknown
device], instance #0
display (pci1002,9712) [Advanced Micro Devices, Inc. [AMD/ATI]
RS880M [Mobility Radeon HD 4225/4250]], instance #0
pci1022,9606 (pciex1022,9606) [Advanced Micro Devices, Inc. [AMD]
RS780 PCI to PCI bridge (PCIE port 2)], instance #0
pci103c,705d (pciex14e4,165b) [Broadcom Corporation NetXtreme
BCM5723 Gigabit Ethernet PCIe], instance #0
pci103c,1609 (pciex1002,4391) [Advanced Micro Devices, Inc.
[AMD/ATI] SB7x0/SB8x0/SB9x0 SATA Controller [AHCI mode]], instance #0
disk, instance #2
pci103c,1609 (pciex1002,4397) [Advanced Micro Devices, Inc.
[AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI0 Controller], instance #0
pci103c,1609 (pciex1002,4396) [Advanced Micro Devices, Inc.
[AMD/ATI] SB7x0/SB8x0/SB9x0 USB EHCI Controller], instance #0
pci103c,1609 (pciex1002,4397) [Advanced Micro Devices, Inc.
[AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI0 Controller], instance #1
pci103c,1609 (pciex1002,4396) [Advanced Micro Devices, Inc.
[AMD/ATI] SB7x0/SB8x0/SB9x0 USB EHCI Controller], instance #1
pci1002,4385 (pciex1002,4385) [Advanced Micro Devices, Inc.
[AMD/ATI] SBx00 SMBus Controller] (driver not attached)
isa (pciex1002,439d) [Advanced Micro Devices, Inc. [AMD/ATI]
SB7x0/SB8x0/SB9x0 LPC host controller], instance #0
motherboard (driver not attached)
pci1002,4384 (pciex1002,4384) [Advanced Micro Devices, Inc.
[AMD/ATI] SBx00 PCI to PCI Bridge], instance #1
pci103c,1609 (pciex1002,4397) [Advanced Micro Devices, Inc.
[AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI0 Controller], instance #2
pci103c,1609 (pciex1002,4396) [Advanced Micro Devices, Inc.
[AMD/ATI] SB7x0/SB8x0/SB9x0 USB EHCI Controller], instance #2
pci1022,1200 (pciex1022,1200) [Advanced Micro Devices, Inc. [AMD]
Family 10h Processor HyperTransport Configuration] (driver not attached)
pci1022,1201 (pciex1022,1201) [Advanced Micro Devices, Inc. [AMD]
Family 10h Processor Address Map] (driver not attached)
pci1022,1202 (pciex1022,1202) [Advanced Micro Devices, Inc. [AMD]
Family 10h Processor DRAM Controller] (driver not attached)
pci1022,1203 (pciex1022,1203) [Advanced Micro Devices, Inc. [AMD]
Family 10h Processor Miscellaneous Control] (driver not attached)
pci1022,1204 (pciex1022,1204) [Advanced Micro Devices, Inc. [AMD]
Family 10h Processor Link Control] (driver not attached)
fw, instance #0
cpu, instance #0
cpu, instance #1
sb (driver not attached)
used-resources (driver not attached)
iscsi, instance #0
agpgart, instance #0 (driver not attached)
options, instance #0
pseudo, instance #0
dladm show-phys
LINK MEDIA STATE SPEED DUPLEX DEVICE
bge0 Ethernet up 1000 full bge0
dladm show-phys
LINK MEDIA STATE SPEED DUPLEX DEVICE
bge0 Ethernet up 1000 full bge0
dladm show-linkprop
LINK PROPERTY PERM VALUE DEFAULT POSSIBLE
bge0 speed r- 1000 1000 --
bge0 autopush rw -- -- --
bge0 zone rw -- -- --
bge0 duplex r- full full
half,full
bge0 state r- up up up,down
bge0 adv_autoneg_cap rw 1 1 1,0
bge0 mtu rw 1500 1500 1500
bge0 flowctrl rw bi bi
no,tx,rx,bi
bge0 adv_10gfdx_cap r- -- 0 1,0
bge0 en_10gfdx_cap -- -- 0 1,0
bge0 adv_1000fdx_cap r- 1 0 1,0
bge0 en_1000fdx_cap rw 1 1 1,0
bge0 adv_1000hdx_cap r- 1 0 1,0
bge0 en_1000hdx_cap rw 1 1 1,0
bge0 adv_100fdx_cap r- 1 0 1,0
bge0 en_100fdx_cap rw 1 1 1,0
bge0 adv_100hdx_cap r- 1 0 1,0
bge0 en_100hdx_cap rw 1 1 1,0
bge0 adv_10fdx_cap r- 1 0 1,0
bge0 en_10fdx_cap rw 1 1 1,0
bge0 adv_10hdx_cap r- 1 0 1,0
bge0 en_10hdx_cap rw 1 1 1,0
bge0 maxbw rw -- -- --
bge0 cpus rw -- -- --
bge0 cpus-effective r- 0-1 -- --
bge0 pool rw -- -- --
bge0 pool-effective r- -- -- --
bge0 priority rw high high
low,medium,high
bge0 tagmode rw vlanonly vlanonly
normal,vlanonly
bge0 forward rw 1 1 1,0
bge0 default_tag rw 1 1 --
bge0 learn_limit rw 1000 1000 --
bge0 learn_decay rw 200 200 --
bge0 stp rw 1 1 1,0
bge0 stp_priority rw 128 128 --
bge0 stp_cost rw auto auto --
bge0 stp_edge rw 1 1 1,0
bge0 stp_p2p rw auto auto
true,false,auto
bge0 stp_mcheck rw 0 0 1,0
bge0 protection rw -- --
mac-nospoof,restricted,ip-nospoof,dhcp-nospoof
bge0 allowed-ips rw -- -- --
bge0 allowed-dhcp-cids rw -- -- --
bge0 rxrings rw -- -- --
bge0 rxrings-effective r- -- -- --
bge0 txrings rw -- -- --
bge0 txrings-effective r- -- -- --
bge0 txrings-available r- 0 -- --
bge0 rxrings-available r- 0 -- --
bge0 rxhwclnt-available r- 0 -- --
bge0 txhwclnt-available r- 0 -- --
All looks OK to me.
Regards, Davide.
On Wed, Apr 8, 2015 at 4:54 PM, Svavar Örn Eysteinsson <svavar at pipar-tbwa.is
> wrote:
> Thanks for the quick reply.
>
> Here's my prtconf from the HP microserver :
>
> System Configuration: Oracle Corporation i86pc
> Memory size: 16352 Megabytes
> System Peripherals (Software Nodes):
>
> i86pc
> scsi_vhci, instance #0
> pci, instance #0
> pci103c,1609 (pciex1022,9601) [Advanced Micro Devices, Inc. [AMD]
> RS880 Host Bridge] (driver not attached)
> pci103c,9602 (pciex103c,9602) [Hewlett-Packard Company unknown
> device], instance #0
> display (pci1002,9712) [Advanced Micro Devices, Inc. [AMD/ATI]
> RS880M [Mobility Radeon HD 4225/4250]], instance #0
> pci1022,9606 (pciex1022,9606) [Advanced Micro Devices, Inc. [AMD]
> RS780 PCI to PCI bridge (PCIE port 2)], instance #0
> pci103c,705d (pciex14e4,165b) [Broadcom Corporation NetXtreme
> BCM5723 Gigabit Ethernet PCIe], instance #0
>
>
> Thanks again.
>
> BR,
>
> Svavar O
>
>
>
>
> > On 8. apr. 2015, at 14:33, Dan McDonald <danmcd at omniti.com> wrote:
> >
> > What does "prtconf -d" say about which model number your Broadcom/bge is?
> >
> > There was a massive bge update in the 014 release. Perhaps some error
> path should be less chatty?
> >
> > I'm including the illumos developer's list, just in case.
> >
> > Pardon the top-post,
> > Dan
> >
> >
> >> On Apr 8, 2015, at 5:36 AM, Svavar Örn Eysteinsson <
> svavar at pipar-tbwa.is> wrote:
> >>
> >>
> >> Hello List.
> >>
> >> I recently upgraded my OmniOS installation from 1012 to 1014 on my HP
> Microserver N40L.
> >> Everything went smooth and everything seems OK and solid.
> >>
> >> There are tho, these messages that appear in my logs every now and then
> regarding the network controller (bge0) :
> >>
> >> Apr 7 15:12:33 blackbox genunix: [ID 801725 kern.info] NOTICE: bge0:
> interrupt: flags 0x2c - not updated?
> >> Apr 7 15:15:13 blackbox genunix: [ID 801725 kern.info] NOTICE: bge0:
> interrupt: flags 0x86 - not updated?
> >> Apr 7 15:17:13 blackbox genunix: [ID 801725 kern.info] NOTICE: bge0:
> interrupt: flags 0x94 - not updated?
> >> Apr 7 15:22:46 blackbox genunix: [ID 801725 kern.info] NOTICE: bge0:
> interrupt: flags 0xc2 - not updated?
> >> Apr 7 15:36:25 blackbox genunix: [ID 801725 kern.info] NOTICE: bge0:
> interrupt: flags 0x6a - not updated?
> >> Apr 7 15:37:57 blackbox genunix: [ID 801725 kern.info] NOTICE: bge0:
> interrupt: flags 0x4b - not updated?
> >> Apr 7 15:42:07 blackbox genunix: [ID 801725 kern.info] NOTICE: bge0:
> interrupt: flags 0x68 - not updated?
> >> Apr 7 15:42:14 blackbox genunix: [ID 801725 kern.info] NOTICE: bge0:
> interrupt: flags 0x38 - not updated?
> >> Apr 7 15:42:38 blackbox genunix: [ID 801725 kern.info] NOTICE: bge0:
> interrupt: flags 0x6 - not updated?
> >> Apr 7 15:44:58 blackbox genunix: [ID 801725 kern.info] NOTICE: bge0:
> interrupt: flags 0xa8 - not updated?
> >> Apr 7 15:45:43 blackbox genunix: [ID 801725 kern.info] NOTICE: bge0:
> interrupt: flags 0xbb - not updated?
> >> Apr 7 15:48:28 blackbox genunix: [ID 801725 kern.info] NOTICE: bge0:
> interrupt: flags 0xde - not updated?
> >> Apr 7 15:50:05 blackbox genunix: [ID 801725 kern.info] NOTICE: bge0:
> interrupt: flags 0xb9 - not updated?
> >> Apr 7 15:50:58 blackbox genunix: [ID 801725 kern.info] NOTICE: bge0:
> interrupt: flags 0x62 - not updated?
> >> Apr 7 15:52:08 blackbox genunix: [ID 801725 kern.info] NOTICE: bge0:
> interrupt: flags 0x26 - not updated?
> >> Apr 7 15:52:35 blackbox genunix: [ID 801725 kern.info] NOTICE: bge0:
> interrupt: flags 0x57 - not updated?
> >> Apr 7 15:53:10 blackbox genunix: [ID 801725 kern.info] NOTICE: bge0:
> interrupt: flags 0x3e - not updated?
> >> Apr 7 15:54:23 blackbox genunix: [ID 801725 kern.info] NOTICE: bge0:
> interrupt: flags 0xe8 - not updated?
> >> Apr 7 15:54:43 blackbox genunix: [ID 801725 kern.info] NOTICE: bge0:
> interrupt: flags 0xe2 - not updated?
> >> Apr 7 15:55:00 blackbox genunix: [ID 801725 kern.info] NOTICE: bge0:
> interrupt: flags 0xab - not updated?
> >> Apr 7 16:01:06 blackbox genunix: [ID 801725 kern.info] NOTICE: bge0:
> interrupt: flags 0x1c - not updated?
> >> Apr 7 17:53:03 blackbox genunix: [ID 801725 kern.info] NOTICE: bge0:
> interrupt: flags 0x2a - not updated?
> >> Apr 7 18:24:48 blackbox genunix: [ID 801725 kern.info] NOTICE: bge0:
> interrupt: flags 0x65 - not updated?
> >> Apr 7 18:51:17 blackbox genunix: [ID 801725 kern.info] NOTICE: bge0:
> interrupt: flags 0xd7 - not updated?
> >> Apr 7 18:51:27 blackbox genunix: [ID 801725 kern.info] NOTICE: bge0:
> interrupt: flags 0xea - not updated?
> >> Apr 7 18:52:07 blackbox genunix: [ID 801725 kern.info] NOTICE: bge0:
> interrupt: flags 0xb - not updated?
> >> Apr 7 18:57:35 blackbox genunix: [ID 801725 kern.info] NOTICE: bge0:
> interrupt: flags 0xaf - not updated?
> >> Apr 7 18:58:22 blackbox genunix: [ID 801725 kern.info] NOTICE: bge0:
> interrupt: flags 0x3d - not updated?
> >> Apr 7 18:58:50 blackbox genunix: [ID 801725 kern.info] NOTICE: bge0:
> interrupt: flags 0xbb - not updated?
> >> Apr 7 18:59:37 blackbox genunix: [ID 801725 kern.info] NOTICE: bge0:
> interrupt: flags 0x3e - not updated?
> >> Apr 7 19:00:23 blackbox genunix: [ID 801725 kern.info] NOTICE: bge0:
> interrupt: flags 0xa4 - not updated?
> >> Apr 7 19:01:02 blackbox genunix: [ID 801725 kern.info] NOTICE: bge0:
> interrupt: flags 0xae - not updated?
> >> Apr 7 19:01:54 blackbox genunix: [ID 801725 kern.info] NOTICE: bge0:
> interrupt: flags 0xdd - not updated?
> >> Apr 7 19:15:28 blackbox genunix: [ID 801725 kern.info] NOTICE: bge0:
> interrupt: flags 0x57 - not updated?
> >> Apr 7 19:19:39 blackbox genunix: [ID 801725 kern.info] NOTICE: bge0:
> interrupt: flags 0x50 - not updated?
> >> Apr 7 19:59:40 blackbox genunix: [ID 801725 kern.info] NOTICE: bge0:
> interrupt: flags 0x80 - not updated?
> >> Apr 7 20:00:31 blackbox genunix: [ID 801725 kern.info] NOTICE: bge0:
> interrupt: flags 0x30 - not updated?
> >> Apr 7 20:01:30 blackbox genunix: [ID 801725 kern.info] NOTICE: bge0:
> interrupt: flags 0x2a - not updated?
> >> Apr 7 20:06:51 blackbox genunix: [ID 801725 kern.info] NOTICE: bge0:
> interrupt: flags 0xb2 - not updated?
> >> Apr 7 20:17:15 blackbox genunix: [ID 801725 kern.info] NOTICE: bge0:
> interrupt: flags 0xde - not updated?
> >> Apr 7 20:30:29 blackbox genunix: [ID 801725 kern.info] NOTICE: bge0:
> interrupt: flags 0x41 - not updated?
> >> Apr 7 21:11:20 blackbox genunix: [ID 801725 kern.info] NOTICE: bge0:
> interrupt: flags 0x8 - not updated?
> >> Apr 7 21:33:05 blackbox genunix: [ID 801725 kern.info] NOTICE: bge0:
> interrupt: flags 0xb9 - not updated?
> >> Apr 7 21:39:59 blackbox genunix: [ID 801725 kern.info] NOTICE: bge0:
> interrupt: flags 0xe6 - not updated?
> >> Apr 7 21:51:03 blackbox genunix: [ID 801725 kern.info] NOTICE: bge0:
> interrupt: flags 0x5b - not updated?
> >> Apr 7 21:59:47 blackbox genunix: [ID 801725 kern.info] NOTICE: bge0:
> interrupt: flags 0xe9 - not updated?
> >> Apr 7 22:05:28 blackbox genunix: [ID 801725 kern.info] NOTICE: bge0:
> interrupt: flags 0x88 - not updated?
> >> Apr 7 22:30:45 blackbox genunix: [ID 801725 kern.info] NOTICE: bge0:
> interrupt: flags 0xfb - not updated?
> >> Apr 7 22:52:43 blackbox genunix: [ID 801725 kern.info] NOTICE: bge0:
> interrupt: flags 0xb4 - not updated?
> >> Apr 7 22:56:43 blackbox genunix: [ID 801725 kern.info] NOTICE: bge0:
> interrupt: flags 0x3e - not updated?
> >> Apr 7 23:03:00 blackbox genunix: [ID 801725 kern.info] NOTICE: bge0:
> interrupt: flags 0x5c - not updated?
> >> Apr 8 00:34:39 blackbox genunix: [ID 801725 kern.info] NOTICE: bge0:
> interrupt: flags 0x2e - not updated?
> >> Apr 8 01:00:39 blackbox genunix: [ID 801725 kern.info] NOTICE: bge0:
> interrupt: flags 0xd2 - not updated?
> >> Apr 8 03:20:28 blackbox genunix: [ID 801725 kern.info] NOTICE: bge0:
> interrupt: flags 0x38 - not updated?
> >> Apr 8 03:55:45 blackbox genunix: [ID 801725 kern.info] NOTICE: bge0:
> interrupt: flags 0x24 - not updated?
> >> Apr 8 05:00:06 blackbox genunix: [ID 801725 kern.info] NOTICE: bge0:
> interrupt: flags 0xcd - not updated?
> >> Apr 8 08:42:54 blackbox genunix: [ID 801725 kern.info] NOTICE: bge0:
> interrupt: flags 0x48 - not updated?
> >>
> >> Does anyone know what these interrupt - not updates messages mean ?
> >> I have never seen them before, until after the 1014 update.
> >>
> >> dladm shows :
> >> LINK MEDIA STATE SPEED DUPLEX DEVICE
> >> bge0 Ethernet up 1000 full bge0
> >>
> >> dladm show-link -s :
> >> LINK IPACKETS RBYTES IERRORS OPACKETS OBYTES
> OERRORS
> >> bge0 13344422 2915541511 0 15403475 1025837411 0
> >>
> >>
> >> Thanks in advance.
> >>
> >> Best regards,
> >>
> >> Svavar O
> >> Reykjavik - Iceland
> >>
> >> _______________________________________________
> >> OmniOS-discuss mailing list
> >> OmniOS-discuss at lists.omniti.com
> >> http://lists.omniti.com/mailman/listinfo/omnios-discuss
> >
>
> _______________________________________________
> OmniOS-discuss mailing list
> OmniOS-discuss at lists.omniti.com
> http://lists.omniti.com/mailman/listinfo/omnios-discuss
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://omniosce.org/ml-archive/attachments/20150408/759e99a1/attachment-0001.html>
More information about the OmniOS-discuss
mailing list