[OmniOS-discuss] SMART info

[Brogyányi József]

Why not compile the smart? It's so simple. Our system it's working but 
not omni. I used it on Openindiana and Hipster. I tested our SSD in 
short time then I give up it uses.
My system used 150GB/day. I decided I give up the usage.
The 199 error message shows me the bad IT version.  Definitely not HDD 
error. Now that counter is stopped. This command is working too:

  root at hipster:/home/brogyi# smartctl -A -d sat,12 
/dev/rdsk/c8t50014EE003CCD190d0
smartctl 6.3 2014-07-26 r3976 [i386-pc-solaris2.11] (local build)
Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF READ SMART DATA SECTION ===
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE UPDATED  
WHEN_FAILED RAW_VALUE
   1 Raw_Read_Error_Rate     0x002f   200   200   051    Pre-fail 
Always       -       0
   3 Spin_Up_Time            0x0027   178   176   021    Pre-fail 
Always       -       6075
   4 Start_Stop_Count        0x0032   100   100   000    Old_age 
Always       -       78
   5 Reallocated_Sector_Ct   0x0033   200   200   140    Pre-fail 
Always       -       0
   7 Seek_Error_Rate         0x002e   100   253   000    Old_age 
Always       -       0
   9 Power_On_Hours          0x0032   092   092   000    Old_age 
Always       -       5921
  10 Spin_Retry_Count        0x0032   100   253   000    Old_age 
Always       -       0
  11 Calibration_Retry_Count 0x0032   100   253   000    Old_age 
Always       -       0
  12 Power_Cycle_Count       0x0032   100   100   000    Old_age 
Always       -       78
192 Power-Off_Retract_Count 0x0032   200   200   000    Old_age 
Always       -       77
193 Load_Cycle_Count        0x0032   200   200   000    Old_age 
Always       -       0
194 Temperature_Celsius     0x0022   112   105   000    Old_age 
Always       -       38
196 Reallocated_Event_Count 0x0032   200   200   000    Old_age 
Always       -       0
197 Current_Pending_Sector  0x0032   200   200   000    Old_age 
Always       -       0
198 Offline_Uncorrectable   0x0030   100   253   000    Old_age 
Offline      -       0
199 UDMA_CRC_Error_Count    0x0032   200   195   000    Old_age 
Always       -       14542
200 Multi_Zone_Error_Rate   0x0008   100   253   000    Old_age 
Offline      -       0

>
> On Thu, 9 Apr 2015, Kyle Bruene wrote:
>
> ; Could anyone give me info on getting SMART info about SATA SSD's connected via expanders to an LSI controller in IT mode? I am trying to find how worn these are. Thanks.
>
> I've found the need to add '-d sat,12' to the smartctl arguments in the
> past. That might be able to get some more information from the drive.
>
> Andy
>