[OmniOS-discuss] r151014 feedback

[Doug Hughes]

Aye, fixed in r151014. Somewhere during the fmd storm and reboots, I 
guess they all just disappeared.

Don't suppose you have an upstream open source version of scanpci to 
include? (it's a pretty useful utility)


On 4/24/2015 12:21 AM, Dan McDonald wrote:
> So you fixed this on the 014 BE? Strange the entries went away...
>
> Dan
>
> Sent from my iPhone (typos, autocorrect, and all)
>
>> On Apr 23, 2015, at 11:52 PM, Doug Hughes <doug at will.to> wrote:
>>
>> BINGO
>>
>> I noticed that ixgbe entries were completely missing from driver_aliases. a little bit of googling to remember the syntax to bind the right mapping, a little bit of scanpci (PS - we really should have this as part of OmniOS, I imported it from a Sol10 machine), and I found the mapping and then:
>>
>> root at x4275-3-15-39:/root# add_drv -i '"pciex8086,10fb"' ixgbe
>> root at x4275-3-15-39:/root# dladm show-phys
>> LINK         MEDIA                STATE      SPEED  DUPLEX    DEVICE
>> usbecm0      Ethernet             down       10     full usbecm0
>> igb0         Ethernet             up         1000   full      igb0
>> igb1         Ethernet             up         1000   full      igb1
>> igb2         Ethernet             down       0      half      igb2
>> igb3         Ethernet             up         1000   full      igb3
>> ixgbe0       Ethernet             up         10000  full      ixgbe0
>> ixgbe1       Ethernet             up         10000  full      ixgbe1
>> root at x4275-3-15-39:/root#
>>
>> back in business.
>>
>>
>> On 4/23/2015 4:07 PM, Dan McDonald wrote:
>>>> On Apr 23, 2015, at 3:58 PM, Doug Hughes <doug at will.to> wrote:
>>>>
>>>> Oddly, removing the SFP modules makes no difference. Replacing the modules - still doesn't show up.  I really do expect to see the interfaces in dladm show-phys now.. also add_drv still fails to attach, which is odd. I feel like this has something to do with fault management not clearing state somewhere along the way. This card was definitely working just fine and the only thing that changes was the latest upgrade, followed by a lot of fmadm stuff, and now it seems like the error state has not cleared entirely. We just inserted the new intel optics and I tried add_drv ixgbe again, but it still fails to attach even though lspci sees the card just fine and it shows up in PROM.
>>> Dammit.
>>>
>>> Chris Siebenmann mentions one dead chicken to try, but the catch is, I got the impression that in your old r151012 Boot Environment, everything is working just fine.
>>>
>>> Am I correct in understanding that your r151012 BE works fine with these, but the r151014 BE does not?
>>>
>>> Once you answer that question, I can make suggestions on how to proceed.
>>>
>>> Thanks,
>>> Dan