[OmniOS-discuss] trouble with ashift and 4k blocks
Doug Hughes
doug at will.to
Thu Aug 27 18:31:25 UTC 2015
replaced ancient 1068E with SAS 2308 chipset and all is well. Thanks!
(I rather dislike the ultra long disk names that result from the good old
c0t0d0 , but that's life)
happily, I didn't even have to rebuild the zpool and the mdb output looks
as expected.
On Sun, Aug 23, 2015 at 5:36 PM, Doug Hughes <doug at will.to> wrote:
> I do suspect that there is a problem with the card and the 2TB/4TB. Still,
> shouldn't my sd.conf entries result in zdb showing ashift=12 and mdb
> showing block size 0x1000?
>
> (the comma issue, in answer to other person, is ok. This is not the last
> entry in sd.conf)
>
>
>
> On 8/23/2015 6:20 AM, Alexander Lesle wrote:
>
>> Hello Doug Hughes and List,
>>
>> I use the same HGST drive and they have all 4 TB capacity in my pools.
>>
>> ,-----[ ]-----
>> |
>> | AVAILABLE DISK SELECTIONS:
>> | 0. c2t0d0 <VMware-Virtualdisk-1.0 cyl 5012 alt 2 hd 224 sec 56>
>> | /pci at 0,0/pci15ad,1976 at 10/sd at 0,0
>> | 1. c2t1d0 <VMware-Virtualdisk-1.0 cyl 5012 alt 2 hd 224 sec 56>
>> | /pci at 0,0/pci15ad,1976 at 10/sd at 1,0
>> | 2. c4t5000CCA23DCCC6BCd0 <ATA-HGST HDS724040AL-A580-3.64TB>
>> | /scsi_vhci/disk at g5000cca23dccc6bc
>> | 3. c4t5000CCA23DCD21A4d0 <ATA-HGST HDS724040AL-A580-3.64TB>
>> | /scsi_vhci/disk at g5000cca23dcd21a4
>> | 4. c4t5000CCA23DCD25A1d0 <ATA-HGST HDS724040AL-A580-3.64TB>
>> | /scsi_vhci/disk at g5000cca23dcd25a1
>> | Specify disk (enter its number):
>> |
>> `-------------------
>>
>> When you wrote only one item in sd.conf you must write a ; and not ,
>> at last letter.
>> But this HDD you must not list in sd.conf it will present ashift=12.
>>
>> ,-----[ ]-----
>> |
>> | root at aio:/root# zdb -C
>> | pool_aio:
>> | version: 5000
>> | name: 'pool_aio'
>> | state: 0
>> | txg: 5222458
>> | pool_guid: 11088269185580178933
>> | hostid: 720590413
>> | hostname: 'aio'
>> | vdev_children: 1
>> | vdev_tree:
>> | type: 'root'
>> | id: 0
>> | guid: 11088269185580178933
>> | children[0]:
>> | type: 'mirror'
>> | id: 0
>> | guid: 1388041250297859353
>> | metaslab_array: 33
>> | metaslab_shift: 35
>> | ashift: 12
>> | asize: 4000773570560
>> | is_log: 0
>> | create_txg: 4
>> | children[0]:
>> | type: 'disk'
>> | id: 0
>> | guid: 18178429901005250887
>> | path: '/dev/dsk/c4t5000CCA23DCCC6BCd0s0'
>> | devid: 'id1,sd at n5000cca23dccc6bc/a'
>> | phys_path: '/scsi_vhci/disk at g5000cca23dccc6bc:a'
>> | whole_disk: 1
>> | DTL: 45
>> | create_txg: 4
>> | children[1]:
>> | type: 'disk'
>> | id: 1
>> | guid: 12635800974590752762
>> | path: '/dev/dsk/c4t5000CCA23DCD21A4d0s0'
>> | devid: 'id1,sd at n5000cca23dcd21a4/a'
>> | phys_path: '/scsi_vhci/disk at g5000cca23dcd21a4:a'
>> | whole_disk: 1
>> | DTL: 43
>> | create_txg: 4
>> | children[2]:
>> | type: 'disk'
>> | id: 2
>> | guid: 15588560262687738746
>> | path: '/dev/dsk/c4t5000CCA23DCD25A1d0s0'
>> | devid: 'id1,sd at n5000cca23dcd25a1/a'
>> | phys_path: '/scsi_vhci/disk at g5000cca23dcd25a1:a'
>> | whole_disk: 1
>> | DTL: 41
>> | create_txg: 4
>> | features_for_read:
>> | com.delphix:hole_birth
>> | com.delphix:embedded_data
>> |
>> `-------------------
>> ,-----[ ]-----
>> |
>> | root at aio:/root# zdb | egrep 'ashift| name'
>> | name: 'pool_aio'
>> | ashift: 12
>> | name: 'rpool'
>> | ashift: 9
>> |
>> `-------------------
>>
>> I think its a hardware issue.
>> Test this what Michael Talbott wrote.
>>
>> On August, 22 2015, 23:49 <Doug Hughes> wrote in [1]:
>>
>> I'm following this page:
>>> http://wiki.illumos.org/display/illumos/ZFS+and+Advanced+Format+disks
>>> but I just can't get my HGST 4K disks to get the 4TB capacity in the
>>> zpool.
>>> I've cross referenced and verified multiple times and this should work
>>> for sd_config_list=
>>> "ATA HGST HDS724040AL", "physical-block-size:4096",
>>>
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://omniosce.org/ml-archive/attachments/20150827/a566894f/attachment.html>
More information about the OmniOS-discuss
mailing list