[OmniOS-discuss] How to configure FCoE target in OmniOS?

[Stephan Budach]

Hi guys,

I am trying to configure a FCoE target in OmniOS r016, but I seem to 
cannot get it right. I started out with the documentation for Solaris 
11, which seemd appropriate and configured a fc target and added a view, 
which granted the fcoe port access to that LUN, but the ort doesn't seem 
to login to my Nexus 5500 at all.

This is what I got so far:

root at nfsvmpool03:/root# pkg list | grep fcoe
driver/network/fcoe 0.5.11-0.151016            i--
driver/network/fcoet 0.5.11-0.151016            i--
system/library/libfcoe 0.5.11-0.151016            i--

svcs -a | grep fcoe
disabled       15:35:16 svc:/system/fcoe_initiator:default
online         15:35:39 svc:/system/fcoe_target:default

fcadm hba-port
HBA Port WWN: 2000a0369f590a20
         Port Mode: Target
         Port ID: 0
         OS Device Name: Not Applicable
         Manufacturer: Sun Microsystems, Inc.
         Model: FCoE Virtual FC HBA
         Firmware Version: N/A
         FCode/BIOS Version: N/A
         Serial Number: N/A
         Driver Name: COMSTAR FCoET
         Driver Version: v20091123-1.02
         Type: unknown
         State: offline
         Supported Speeds: 1Gb 10Gb
         Current Speed: not established
         Node WWN: 1000a0369f590a20

stmfadm list-target -v wwn.2000A0369F590A20
Target: wwn.2000A0369F590A20
     Operational Status: Online
     Provider Name     : fcoet
     Alias             : fcoet0
     Protocol          : Fibre Channel
     Sessions          : 0

stmfadm list-view -l 600144F07A34AC66000054D1DEB50001
View Entry: 0
     Host group   : ovmHosts
     Target group : fcoeNFSVMPOOL03
     LUN          : 0

stmfadm list-tg -v fcoeNFSVMPOOL03
Target Group: fcoeNFSVMPOOL03
         Member: wwn.2000A0369F590A20
         Member: wwn.1000A0369F590A20

stmfadm list-hg -v ovmHosts
Host Group: ovmHosts
         Member: wwn.2000A0369F1A171D

I was able to successfully connect my Linux FCoE initiator to the 
fabric, but not the OmniOS target. Is there anything obvious wrong with 
my config?

Thanks,
Stephan