[OmniOS-discuss] iSCSI poor write performance

[Guenther Alka]

Poor write performance is often related to sync write.
Enable write back cache for your logical units (and disable ZFS sync 
property on the filesystem for filebased lu's) and redo some performance 
tests.

Gea


Am 23.09.2015 um 10:51 schrieb Martin Truhlář:
> Tests revealed, that problem is somewhere in disk array itself. Write performance of disk connected directly (via iSCSI) to KVM is poor as well, even write performance measured on Omnios is very poor. So loop is tightened, but there still remains lot of possible hacks.
> I strived to use professional hw (disks included), so I would try to seek the error in a software setup first. Do you have any ideas where to search first (and second, third...)?
>
> FYI mirror 5 was added lately to the running pool.
>
> pool: dpool
>   state: ONLINE
>    scan: scrub repaired 0 in 5h33m with 0 errors on Sun Sep 20 00:33:15 2015
> config:
>
> 	NAME                       STATE     READ WRITE CKSUM      CAP            Product /napp-it   IOstat mess
> 	dpool                      ONLINE       0     0     0
> 	  mirror-0                 ONLINE       0     0     0
> 	    c1t50014EE00400FA16d0  ONLINE       0     0     0      1 TB           WDC WD1002F9YZ-0   S:0 H:0 T:0
> 	    c1t50014EE2B40F14DBd0  ONLINE       0     0     0      1 TB           WDC WD1003FBYX-0   S:0 H:0 T:0
> 	  mirror-1                 ONLINE       0     0     0
> 	    c1t50014EE05950B131d0  ONLINE       0     0     0      1 TB           WDC WD1002F9YZ-0   S:0 H:0 T:0
> 	    c1t50014EE2B5E5A6B8d0  ONLINE       0     0     0      1 TB           WDC WD1003FBYZ-0   S:0 H:0 T:0
> 	  mirror-2                 ONLINE       0     0     0
> 	    c1t50014EE05958C51Bd0  ONLINE       0     0     0      1 TB           WDC WD1002F9YZ-0   S:0 H:0 T:0
> 	    c1t50014EE0595617ACd0  ONLINE       0     0     0      1 TB           WDC WD1002F9YZ-0   S:0 H:0 T:0
> 	  mirror-3                 ONLINE       0     0     0
> 	    c1t50014EE0AEAE7540d0  ONLINE       0     0     0      1 TB           WDC WD1002F9YZ-0   S:0 H:0 T:0
> 	    c1t50014EE0AEAE9B65d0  ONLINE       0     0     0      1 TB           WDC WD1002F9YZ-0   S:0 H:0 T:0
> 	  mirror-5                 ONLINE       0     0     0
> 	    c1t50014EE0AEABB8E7d0  ONLINE       0     0     0      1 TB           WDC WD1002F9YZ-0   S:0 H:0 T:0
> 	    c1t50014EE0AEB44327d0  ONLINE       0     0     0      1 TB           WDC WD1002F9YZ-0   S:0 H:0 T:0
> 	logs
> 	  mirror-4                 ONLINE       0     0     0
> 	    c1t55CD2E404B88ABE1d0  ONLINE       0     0     0      120 GB         INTEL SSDSC2BW12   S:0 H:0 T:0
> 	    c1t55CD2E404B88E4CFd0  ONLINE       0     0     0      120 GB         INTEL SSDSC2BW12   S:0 H:0 T:0
> 	cache
> 	  c1t55CD2E4000339A59d0    ONLINE       0     0     0      180 GB         INTEL SSDSC2BW18   S:0 H:0 T:0
> 	spares
> 	  c2t2d0                   AVAIL         1 TB           WDC WD10EFRX-68F   S:0 H:0 T:0
>
> errors: No known data errors
>
> Martin
>
>
> -----Original Message-----
> From: Dan McDonald [mailto:danmcd at omniti.com]
> Sent: Wednesday, September 16, 2015 1:51 PM
> To: Martin Truhlář
> Cc: omnios-discuss at lists.omniti.com; Dan McDonald
> Subject: Re: [OmniOS-discuss] iSCSI poor write performance
>
>
>> On Sep 16, 2015, at 4:04 AM, Martin Truhlář <martin.truhlar at archcon.cz> wrote:
>>
>> Yes, I'm aware, that problem can be hidden in many places.
>> MTU is 1500. All nics and their setup are included at this email.
> Start by making your 10GigE network use 9000 MTU.  You'll need to configure this on both ends (is this directly-attached 10GigE?  Or over a switch?).
>
> Dan
>
> _______________________________________________
> OmniOS-discuss mailing list
> OmniOS-discuss at lists.omniti.com
> http://lists.omniti.com/mailman/listinfo/omnios-discuss