[OmniOS-discuss] Supermicro X9DR3-F PCI Bus reported fault.

[Shaun McGuane]

Hi OmniOS list,

I am wondering if anyone has had any experience with the Supermicro boards for OmniOS in particular Model X9DR3-F
I have it setup with 2x Intel E5-2670 processors (so I can use all the pci-e slots) and 256GB DDR3 ECC Ram as a base.

I have then tried to run this with LSI 9207-8i Cards x3 for the complete setup, started off with none to get a base OmniOS
Install on the server to ensure all is working OK before adding cards and drives.

The OmniOS version I am running is r151014 – I have also tried the latest current build from 2016 and I get the same result

I am getting the following error when performing : fmadm faulty

Fault class: fault.io.pciex.device-interr
Affects: dev:////pci@78,0/pci8086,3c08@3/pci8086,a21f@0 faulted and taken out of service
FRU: “CPU2_SLOT6”

This slot being reported is the slot closest to the cpu.

The problem that I have is that I have 2 of these boards are showing the same error and I have tested these boards running
Ubuntu 14.04 and Windows and I do not have any errors or issues using this slot. I am new to using super micro boards for
my ZFS arrays and are used to using HP Servers (DL180 G6, etc)

I don’t necessarily need to use this slot, but I am seeing strange issues with removing and re-inserting drives where drives
Show up when running "iostat –En” but not when I run format to label them.

I thought the 2 issues maybe connected.

Kind Regards
Shaun McGuane


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://omniosce.org/ml-archive/attachments/20160427/1faa8240/attachment-0001.html>