[OmniOS-discuss] LTS r151014 installation issue from USB stick

[Krzysztof Grzempa]

Correct me if I'm wrong..There is no way to setup raidz on rpool. Right ?

2016-08-10 14:37 GMT+02:00 Krzysztof Grzempa <grzempek at gmail.com>:

> >If the card as advertised as USB 3.0 then it will be xHCI.  Only a
> >card which is genuinely only USB 2.0/1.1 will work.  Even then, you
> >might not be able to use, say, a USB keyboard in the BIOS when the
> >keyboard is in the offboard card. That's the annoying thing in my
> >setup-- if I want to interact with the BIOS, the keyboard must be in
> >an onboard, xHCI port.  But when we get to the OS, it must be in the
> >offboard card for it to work.
>
> It is adertised as USB2.0 on PCI-E. So i hope it will work.
> http://www.znak.pl/index.php?prid=kontUSB20Del89135
> The possible issue with keyboard is not bother me, as mostly i will manage
> this box via ssh, having keyboard detached..
> I will feedback with results
>
> Thanks a lot
> Krzysztof
>
> 2016-08-05 18:21 GMT+02:00 Eric Sproul <eric.sproul at circonus.com>:
>
>> On Fri, Aug 5, 2016 at 12:14 PM, Krzysztof Grzempa <grzempek at gmail.com>
>> wrote:
>> > Right, probably it is my case too. (lshw showed me xHCI bus on Debian).
>> > Will this PCIE usb2.0 card work for me then ?
>> > I'm lack of knowledge if PCIE usb card use UCHI/EHCI or XHCI.
>>
>> If the card as advertised as USB 3.0 then it will be xHCI.  Only a
>> card which is genuinely only USB 2.0/1.1 will work.  Even then, you
>> might not be able to use, say, a USB keyboard in the BIOS when the
>> keyboard is in the offboard card. That's the annoying thing in my
>> setup-- if I want to interact with the BIOS, the keyboard must be in
>> an onboard, xHCI port.  But when we get to the OS, it must be in the
>> offboard card for it to work.
>>
>> Eric
>>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://omniosce.org/ml-archive/attachments/20160813/8f62c634/attachment.html>