[OmniOS-discuss] [discuss] COMSTAR hanging

[Brian Hechinger]

Yeah, I’m using the 1068E to boot from (this has been supported since before Illumos) but that doesn’t have anything accessed by COMSTAR.

It’s the ICH10R SATA that hosts the disks that COMSTAR shares out space from.

-brian

> On Jan 8, 2016, at 1:31 PM, Richard Jahnel <rjahnel at ellipseinc.com> wrote:
> 
> First off, love SuperMicro good choice IMHO.
> 
> This board has two on board controllers.
> 
> LSI SAS1068E (not 100% sure there are working illumos drivers for this one)
> 
> And
> 
> Intel ICH10R SATA (So I'm guessing your using this one.)
> 
> -----Original Message-----
> From: OmniOS-discuss [mailto:omnios-discuss-bounces at lists.omniti.com] On Behalf Of Brian Hechinger
> Sent: Friday, January 08, 2016 12:16 PM
> To: Matej Zerovnik <matej at zunaj.si>
> Cc: omnios-discuss <omnios-discuss at lists.omniti.com>
> Subject: Re: [OmniOS-discuss] [discuss] COMSTAR hanging
> 
> 
>> Which controller exactly do you have?
> 
> Whatever ACHI stuff is built into the motherboard. Motherboard is X8DTL-3F.
> 
>> Do you know firmware version?
> 
> I’m assuming this is linked to the BIOS version?
> 
>> Which hard drives?
> 
> Hitachi-HUA723030ALA640-MKAOAA50-2.73TB
> 
>> It might not tell much, but it’s good to have as much information as possible.
>> 
>> When comstar hangs, can you telnet to the iSCSI port?
>> What does svcs says, is the service running?
>> What happens in you try to restart it?
>> How do you restart it?
> 
> I’ll try all these things next time.
> 
>> In my case, svcs reported service running, but when I tried to telnet, there was no connection as well as there was no listening port opened when checking with 'netstat -an'. If I tried to restart target and stmf service, but stmf service got stucked in online* state and would not start. Reboot was the only solution in my case, but as I said, latest 014 release is working OK (but then again, load got reduced).
> 
> All good info. Thanks!
> 
> -brian
> 
>> 
>> Matej
>> 
>>> On 08 Jan 2016, at 17:50, Dave Pooser <dave-oo at pooserville.com> wrote:
>>> 
>>>>> On Jan 8, 2016, at 11:22 AM, Brian Hechinger <wonko at 4amlunch.net> wrote:
>>>>> 
>>>>> No, ZFS raid10
>>>> 
>>>> Saw the HW-RAID term, and got concerned.  That's what, raidz2 in ZFS-ese?
>>> 
>>> It's a zpool with multiple mirror vdevs.
>>> 
>>> -- 
>>> Dave Pooser
>>> Cat-Herder-in-Chief, Pooserville.com
>>> 
>>> 
>>> _______________________________________________
>>> OmniOS-discuss mailing list
>>> OmniOS-discuss at lists.omniti.com
>>> http://lists.omniti.com/mailman/listinfo/omnios-discuss
>> 
>> _______________________________________________
>> OmniOS-discuss mailing list
>> OmniOS-discuss at lists.omniti.com
>> http://lists.omniti.com/mailman/listinfo/omnios-discuss
> 
> _______________________________________________
> OmniOS-discuss mailing list
> OmniOS-discuss at lists.omniti.com
> http://lists.omniti.com/mailman/listinfo/omnios-discuss