[OmniOS-discuss] Installation Boot hangs after CPU/USB initialization - Intel Motherboard
Svavar Örn Eysteinsson
svavar at pipar-tbwa.is
Mon Mar 14 10:19:59 UTC 2016
Solaris 11.3 will boot just fine on USB disk, but OmniOS will not.
My boot options are just : -m verbose -v
thanks
Svavar
> On 10. mar. 2016, at 09:12, Svavar Örn Eysteinsson <svavar at pipar-tbwa.is> wrote:
>
> I have tried both CD-ROM ISO image boot and also the USB stick boot.
> the USB thumb drive boots just fine on my VMware fusion on my Mac.
>
> So it's not the installation that is corrupt.
>
> thanks.
>
>
>> On 9. mar. 2016, at 15:56, cristian pancià <hazzino at gmail.com <mailto:hazzino at gmail.com>> wrote:
>>
>> Hi just as an option try to disable Turbo Boots,enable Intel Virtual Tech, and intel Direct I/O, are you sure that the iso installation works?have you a spare machine with a virtualization software installed?does it boot?
>> maybe you have to dd the image or try anothere usb key,just a supposition
>> Good luck.
>> How much did you paid for that MB? is iPMI installed?
>> Can some one suggest my a home server MB with skylake design with i7 or xeon processor with IPMI software that will cost around 300Euro?
>>
>> On Wed, Mar 9, 2016 at 11:00 AM, Svavar Örn Eysteinsson <svavar at pipar-tbwa.is <mailto:svavar at pipar-tbwa.is>> wrote:
>> Hi Dan.
>> Thanks for the reply.
>>
>> I disabled all the C-states and it's the same story.
>>
>> If I boot from the SATA CD-ROM installation it hangs on boot right after :
>>
>> cpu7: Intel(r) Xeon(r) CPU E5520 @ 2.27Ghz
>> cpu6: Intel(r) Xeon(r) CPU E5520 @ 2.27Ghz
>> cpu7: initialization complete - online
>> cpu6: initialization complete - online
>>
>> See here : https://dl.dropboxusercontent.com/u/16134/omnios_intel_cstates_disabled_boot.JPG <https://dl.dropboxusercontent.com/u/16134/omnios_intel_cstates_disabled_boot.JPG>
>>
>> If I boot from USB stick, with USB 2.0 enabled and or disabled the last message is always releated to usb stuff
>> right after cpu6: initialization complete - online.
>>
>>
>> So my BIOS configuration right now is :
>>
>> Intel QPI Frequency Select [Auto Max]
>> Intel Turbo Boots Technology [Enabled]
>> Enhanced Intel Speedstep Tech [Enabled]
>> Processor C3 [Disabled]
>> Processor C6 [Disabled]
>> Intel Hyper-Threading Tech [Disabled]
>> Core Multi-Processing [All]
>> Execute Disable Bit [Disabled]
>> Intel Virtualization Technology [Disasbled]
>> Intel VT for Directed I/O [Disabled]
>>
>> and some more.
>>
>> My Bios Configuration can been seen here :
>>
>> https://dl.dropboxusercontent.com/u/16134/omnios_intel_bios1.JPG <https://dl.dropboxusercontent.com/u/16134/omnios_intel_bios1.JPG>
>> https://dl.dropboxusercontent.com/u/16134/omnios_intel_bios2.JPG <https://dl.dropboxusercontent.com/u/16134/omnios_intel_bios2.JPG>
>> https://dl.dropboxusercontent.com/u/16134/omnios_intel_bios3.JPG <https://dl.dropboxusercontent.com/u/16134/omnios_intel_bios3.JPG>
>> https://dl.dropboxusercontent.com/u/16134/omnios_intel_bios4.JPG <https://dl.dropboxusercontent.com/u/16134/omnios_intel_bios4.JPG>
>>
>>
>> Best regards,
>>
>> Svavar O
>>
>>
>>
>> > On 8. mar. 2016, at 15:13, Dan McDonald <danmcd at omniti.com <mailto:danmcd at omniti.com>> wrote:
>> >
>> >
>> >> On Mar 8, 2016, at 6:17 AM, Svavar Örn Eysteinsson <svavar at pipar-tbwa.is <mailto:svavar at pipar-tbwa.is>> wrote:
>> >>
>> >> Should I disable other CPU ? Should a enable C2, C3 state in BIOS or is that not relevant?
>> >
>> > Disable C-states, that's general illumos advice (regardless of distro).
>> >
>> > Dan
>> >
>>
>>
>> _______________________________________________
>> OmniOS-discuss mailing list
>> OmniOS-discuss at lists.omniti.com <mailto:OmniOS-discuss at lists.omniti.com>
>> http://lists.omniti.com/mailman/listinfo/omnios-discuss <http://lists.omniti.com/mailman/listinfo/omnios-discuss>
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://omniosce.org/ml-archive/attachments/20160314/251ccee7/attachment-0001.html>
More information about the OmniOS-discuss
mailing list