[OmniOS-discuss] LSI3108

[Matej Žerovnik]

Hey,

I just plugged in the card and it was recognized:) It’s a LSI SAS3008 card.
prtconf -d says:
pci1000,30a0 (pciex1000,97) [LSI Logic / Symbios Logic SAS3008 PCI-Express Fusion-MPT SAS-3], instance #8

On the other hand, lspci says different:
15:00.0 RAID bus controller: LSI Logic / Symbios Logic MegaRAID SAS-3 3108 [Invader] (rev 02)

prtconf gives the right info.

I run P12 IT firmware on it. 

Matej

> On 24 May 2016, at 23:52, Richard Skelton <skeltonr at btconnect.com> wrote:
> 
> Hi Matej,
> How did you get the mpt_sas driver to attach to your card ?
> Looks like your device id is pci1000,30a0.
> From prtconf -d I see for my SAS 9305-24i :-
>             pci1000,31a0 (pciex1000,c4) [LSI Logic / Symbios Logic SAS3224 PCI-Express Fusion-MPT SAS-3] (driver not attached)
> 
> lspci does not sow the card :-(
> 
> Matej Žerovnik wrote:
>> 
>> There is even an updated version of P20 that should eliminate the problems. I think the version number is 20.04.000 where the broken version was 20.02.000. I think I read about that on FreeNAS forum.
>> 
>> As far as 12G goes, I’m about to run P12. I did some tests and so far no problems apart from FW upload tce invalid warning when I run sas3ircu list
>> May 19 12:11:34 node scsi: [ID 107833 kern.warning] WARNING: /pci at 74,0/pci8086,2f08 at 3/pci1000,30a0 at 0 (mpt_sas8):
>> May 19 12:11:34 node         FW Upload tce invalid!
>> 
>> Matej
>> 
>>> On 23 May 2016, at 22:23, Schweiss, Chip <chip at innovates.com <mailto:chip at innovates.com>> wrote:
>>> 
>>> 
>>> On Mon, May 23, 2016 at 3:18 PM, Dan McDonald <danmcd at omniti.com <mailto:danmcd at omniti.com>> wrote:
>>> 
>>> > On May 23, 2016, at 4:10 PM, Fábio Rabelo <fabio at fabiorabelo.wiki.br <mailto:fabio at fabiorabelo.wiki.br>> wrote:
>>> >
>>> > Hi to all ...
>>> >
>>> > You may need to flash the IT firmware :
>>> >
>>> > http://www.avagotech.com/products/server-storage/host-bus-adapters/sas-9305-24i#downloads <http://www.avagotech.com/products/server-storage/host-bus-adapters/sas-9305-24i#downloads>
>>> 
>>> And if you do, make sure it's version 19 or lower.  The IT firmware > 19 is known to be flaky.  Check the illumos list archives for details on why.
>>> 
>>> That only on the 6G HBA.   On the 12G HBA version 12 is the newest.   I haven't heard any preferred versions on these.  I've been running  v10 for several months now without issue.
>>> 
>>> -Chip
>>>  
>>> 
>>> Dan
>>> 
>>> _______________________________________________
>>> OmniOS-discuss mailing list
>>> OmniOS-discuss at lists.omniti.com <mailto:OmniOS-discuss at lists.omniti.com>
>>> http://lists.omniti.com/mailman/listinfo/omnios-discuss <http://lists.omniti.com/mailman/listinfo/omnios-discuss>
>>> 
>>> _______________________________________________
>>> OmniOS-discuss mailing list
>>> OmniOS-discuss at lists.omniti.com <mailto:OmniOS-discuss at lists.omniti.com>
>>> http://lists.omniti.com/mailman/listinfo/omnios-discuss <http://lists.omniti.com/mailman/listinfo/omnios-discuss>
>> 
>> 
>> _______________________________________________
>> OmniOS-discuss mailing list
>> OmniOS-discuss at lists.omniti.com <mailto:OmniOS-discuss at lists.omniti.com>
>> http://lists.omniti.com/mailman/listinfo/omnios-discuss <http://lists.omniti.com/mailman/listinfo/omnios-discuss>
>>   

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://omniosce.org/ml-archive/attachments/20160525/4a539000/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: smime.p7s
Type: application/pkcs7-signature
Size: 3468 bytes
Desc: not available
URL: <https://omniosce.org/ml-archive/attachments/20160525/4a539000/attachment.bin>