[OmniOS-discuss] Installation Failing (Reboots)

[Garland McAlexander]

Just attempted via IPMI CDROM and the same issue persists, gets to splash
screen, loads a few lines of text and forces a reboot.

On Mon, Sep 26, 2016 at 11:32 AM, Dale Ghent <daleg at omniti.com> wrote:

>
> 2 options until the USB3 XHCI driver is ready (which it is close to being
> so)
>
> 1) Put in a USB 2 PCIe add-on card at least temporarily.
> 2) If your box has IPMI and virtual CDROM/remote disk KVM services, use
> those instead.
>
> > On Sep 26, 2016, at 11:04 AM, Garland McAlexander <garland at bustle.com>
> wrote:
> >
> > I've disabled all USB 3.0 support in BIOS, but it's still failing to
> boot from USB. I still get the splash screen, and then a few lines of text
> until it reboots itself.
> >
> > On Mon, Sep 26, 2016 at 3:04 AM, Matej Žerovnik <matej at zunaj.si> wrote:
> > Usually one can disable USB3 support in BIOS and then it should work.
> >
> > Matej
> >
> > > On 25 Sep 2016, at 21:36, Dan McDonald <danmcd at omniti.com> wrote:
> > >
> > >
> > >> On Sep 25, 2016, at 1:02 PM, Garland McAlexander <garland at bustle.com>
> wrote:
> > >>
> > >> So would a workaround be installing it via a USB2.0 drive, or will
> USB not work at all due to the USB3.0 slot?
> > >
> > > The USB3.0 slot presents as currently-unsupported XHCI.  You either
> need to convinced your bios to do EHCI (USB2) or wait for XHCI support to
> land in illumos & OmniOS.
> > >
> > > Dan
> > >
> > > _______________________________________________
> > > OmniOS-discuss mailing list
> > > OmniOS-discuss at lists.omniti.com
> > > http://lists.omniti.com/mailman/listinfo/omnios-discuss
> >
> >
> > _______________________________________________
> > OmniOS-discuss mailing list
> > OmniOS-discuss at lists.omniti.com
> > http://lists.omniti.com/mailman/listinfo/omnios-discuss
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://omniosce.org/ml-archive/attachments/20160926/e577a407/attachment-0001.html>