[OmniOS-discuss] flowadm stats

[Michael Talbott]

Interesting. So it looks like when I create a flow, I can monitor that flow in flowstat which is fine and dandy. But.. It also appears that the same traffic is then removed from dlstat stats. Is that normal/intentional? I assumed that dlstat would give the overall interface I/O and flow would give just a detailed look at the traffic as defined in the flow.

# flowstat -i1 nfs_vlan411
           FLOW    IPKTS   RBYTES    IERRS    OPKTS   OBYTES    OERRS
    nfs_vlan411   56.59M  430.08G        0   51.82M  231.43G        0
    nfs_vlan411    2.99K  287.62K        0   14.13K  119.09M        0
    nfs_vlan411    5.49K   27.33M        0   14.02K  104.52M        0
    nfs_vlan411    2.32K  224.67K        0   10.81K   90.58M        0
    nfs_vlan411    4.71K   19.47M        0   13.30K  102.28M        0
    nfs_vlan411    2.72K  298.12K        0   14.06K  119.10M        0

# dlstat -i1 vlan411
           LINK    IPKTS   RBYTES    OPKTS   OBYTES
        vlan411   17.11G  125.35T   15.95G   67.24T
        vlan411        0        0        3      138
        vlan411        0        0        0        0
        vlan411        0        0        0        0



> On Jan 20, 2017, at 12:23 PM, Dan McDonald <danmcd at omniti.com> wrote:
> 
> 
>> On Jan 20, 2017, at 3:22 PM, Michael Talbott <mtalbott at lji.org> wrote:
>> 
>> Perfect. Thanks.
>> 
> 
> If this indeed solves your problems, I think illumos 7210 should change to be "document flowstat and dlstat".  :)
> 
> Hope this helps,
> Dan
>