[OmniOS-discuss] Corrupted file recovery and restoring pool to ONLINE

[steve at linuxsuite.org]

  Howdy!

             I had a corrupted file during resilvering after a drive
failure/replacment, I replaced the file from a backup and the
pool started to resilver again. If finished and is still in a
state
that shows DEGRADED with file errors. I can read the file fine and md5sum
checks out.

          What do I need to do to put this pool into an ONLINE state and
remove the error?
Or is this pool still problematic??

        thanx - steve

  pool: B-034
 state: DEGRADED
status: One or more devices has experienced an error resulting in data
        corruption.  Applications may be affected.
action: Restore the file in question if possible.  Otherwise restore the
        entire pool from backup.
   see: http://illumos.org/msg/ZFS-8000-8A
  scan: resilvered 3.46T in 28h19m with 3 errors on Sun Jan 22 17:43:53 2017
config:

        NAME                            STATE     READ WRITE CKSUM
        B-034                           DEGRADED     0     0     3
          raidz1-0                      DEGRADED     0     0     6
            c0t5000C500571D5D9Fd0s0     ONLINE       0     0     0
            c0t5000C500571D69D3d0s0     ONLINE       0     0     0
            c10t50000C0F01F82C82d0s0    ONLINE       0     0     0
            c10t50000C0F01F84B6Ad0s0    ONLINE       0     0     0
            replacing-4                 DEGRADED     0     0     0
              c10t50000C0F0132772Ed0s0  OFFLINE      0     0     0
              c10t5000039578C8A83Ed0s0  ONLINE       0     0     0
            c10t50000C0F0136989Ad0s0    ONLINE       0     0     0
            c10t50000C0F01327226d0s0    ONLINE       0     0     0
            c10t50000C0F01327316d0s0    ONLINE       0     0     0

errors: Permanent errors have been detected in the following files:

        B-034 at nov_5_2016:/51/17/1000621751.bkt