[OmniOS-discuss] Fibrechannel Tape Library

[Michael Talbott]

Managed to fix my own problem. I forgot to set the library itself in
logical mode instead of physical mode. The os now magically sees the
changer and populates /dev/scsi/changer/ appropriately.

On Fri, Mar 9, 2018 at 10:56 AM, Michael Talbott <mtalbott at lji.org> wrote:

> Anyone have any tips to get a fibrechannel based tape library properly
> recognized in omnios as /dev/changer or similar?
>
> All the zoning is fine and I can see the tape drives and they show in
> /dev/rmt/, but the library changer is showing up as an unknown type:
>
> # cfgadm -al
> Ap_Id                          Type         Receptacle   Occupant
>  Condition
> c12::500084f10010e0e3          unknown      connected    unconfigured
> unknown
> c12::500084f20010e0e3          unknown      connected    unconfigured
> unknown
> c12::500507631248cc65          tape         connected    configured
>  unknown
> c12::500507631248d745          tape         connected    configured
>  unknown
> c12::500507631248d7a2          tape         connected    configured
>  unknown
> c12::50050763124a6979          tape         connected    configured
>  unknown
>
> I've tried:
> add_drv -i '"scsiclass,08" "scsiclass,08.QUALSTAR,*"' sgen
> update_drv -fv sgen
> reboot
>
> But, no luck. Any suggestions?
>
> Thanks,
>
> Michael
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://omniosce.org/ml-archive/attachments/20180309/7b926bf1/attachment.html>