[OmniOS-discuss] Ang: Recommend any FC Gen 5 or Gen 6 HBAs?

[Johan Kragsterman]

Hi!




-----"OmniOS-discuss" <omnios-discuss-bounces at lists.omniti.com> skrev: -----
Till: "omnios-discuss at lists.omniti.com" <omnios-discuss at lists.omniti.com>
Från: "Phil Forrest" 
Sänt av: "OmniOS-discuss" 
Datum: 2018-10-22 16:28
Ärende: [OmniOS-discuss] Recommend any FC Gen 5 or Gen 6 HBAs?

Hello everyone,

I have a new project, so everything mentioned here is with clean OS installs. Not production.

Can anyone recommend a Gen 5 or Gen 6 (preferred) 16GB Fibre Channel HBA known to work in r151022 or later?

I have tried, without success, to get the following Fibre Channel Cards to work in a clean r151026 install on SuperMicro System  SYS-2029P-C1R

Emulex Corporation Lancer Gen6: LPe32000 Fibre Channel Host Adapter
QLogic Corp. ISP8324-based 16Gb Fibre Channel to PCI Express Adapter

The system sees the hardware:

root at claw:~# prtdiag
System Configuration: Supermicro SYS-2029P-C1R
BIOS Configuration: American Megatrends Inc. 2.1 06/29/2018
BMC Configuration: IPMI 2.0 (KCS: Keyboard Controller Style)

==== Processor Sockets ====================================

Version                          Location Tag
-------------------------------- --------------------------
Intel(R) Xeon(R) Gold 6136 CPU @ 3.00GHz CPU1
Intel(R) Xeon(R) Gold 6136 CPU @ 3.00GHz CPU2

==== Memory Device Sockets ================================

Type        Status Set Device Locator      Bank Locator
----------- ------ --- ------------------- ----------------
DDR4        in use 0   P1-DIMMA1           P0_Node0_Channel0_Dimm0
DDR4        in use 0   P1-DIMMA2           P0_Node0_Channel0_Dimm1
DDR4        in use 0   P1-DIMMB1           P0_Node0_Channel1_Dimm0
DDR4        in use 0   P1-DIMMC1           P0_Node0_Channel2_Dimm0
DDR4        in use 0   P1-DIMMD1           P0_Node1_Channel0_Dimm0
DDR4        in use 0   P1-DIMMD2           P0_Node1_Channel0_Dimm1
DDR4        in use 0   P1-DIMME1           P0_Node1_Channel1_Dimm0
DDR4        in use 0   P1-DIMMF1           P0_Node1_Channel2_Dimm0
DDR4        in use 0   P2-DIMMA1           P1_Node0_Channel0_Dimm0
DDR4        in use 0   P2-DIMMA2           P1_Node0_Channel0_Dimm1
DDR4        in use 0   P2-DIMMB1           P1_Node0_Channel1_Dimm0
DDR4        in use 0   P2-DIMMC1           P1_Node0_Channel2_Dimm0
DDR4        in use 0   P2-DIMMD1           P1_Node1_Channel0_Dimm0
DDR4        in use 0   P2-DIMMD2           P1_Node1_Channel0_Dimm1
DDR4        in use 0   P2-DIMME1           P1_Node1_Channel1_Dimm0
DDR4        in use 0   P2-DIMMF1           P1_Node1_Channel2_Dimm0

==== On-Board Devices =====================================

==== Upgradeable Slots ====================================

ID  Status    Type             Description
--- --------- ---------------- ----------------------------
1   in use    PCI Exp. Gen 3 x8 CPU1 Slot1 PCI-E 3.0 X8, LSI Logic / Symbios Logic MegaRAID SAS-3 3108 [Invader] (mr_sas)
2   available PCI Exp. Gen 3 x16 CPU1 Slot2 PCI-E 3.0 X16
3   in use    PCI Exp. Gen 3 x8 CPU1 Slot3 PCI-E 3.0 X8, QLogic Corp. ISP8324-based 16Gb Fibre Channel to PCI Express Adapter (<unknown>)
4   in use    PCI Exp. Gen 3 x16 CPU2 Slot4 PCI-E 3.0 X16, Emulex Corporation Lancer Gen6: LPe32000 Fibre Channel Host Adapter (emlxs)
5   available PCI Exp. Gen 3 x16 CPU2 Slot5 PCI-E 3.0 X16
6   in use    PCI Exp. Gen 3 x16 CPU2 Slot6 PCI-E 3.0 X16, Intel Corporation 82599ES 10-Gigabit SFI/SFP+ Network Connection (ixgbe)
root at claw:~# 
root at claw:~# fcinfo hba-port
No Adapters Found.

Thanks for any comments,
Phil




I was writing to you before about this, and I suggested you to check the driver:

root at omni:~# prtconf -D | grep pci1077
            pci1077,138, instance #0 (driver name: qlc)
            pci1077,138, instance #1 (driver name: qlc)
root at omni:~# 

If your pci addr still is pci1077? Which it was according to your previous mail in this issue. 

Did you check that? If so, what was the output?

If it shows up empty, no driver is attached, and I'm sure no driver is available in omnios.

I can't tell about the other Illumos distros, perhaps you check with Nexenta, they should at least know if there is an Illumos driver or not...

Rgrds Johan








_______________________________________________
OmniOS-discuss mailing list
OmniOS-discuss at lists.omniti.com
http://lists.omniti.com/mailman/listinfo/omnios-discuss