[OmniOS-discuss] Perc h310 (mini)

[Grant Albitz]

here is what it came back with, based on this any recommendations for what i can try? format shows no disks attached, i have 3 disks as jbod attached to the controller at the moment.



compatible: 'pciex1000,73.1028.1f51.3' + 'pciex1000,73.1028.1f51' + 'pciex1000,73.3' + 'pciex1000,73' + pciexclass,010400' + 'pciexclass,0104' + 'pci1000,73.1028.1f51.3' + 'pci1000,73.1028.1f51' + 'pci1028,1f51' + 'pci1000,73.3' + 'pci1000,73' + 'pciclass,010400' + 'pciclass,0104'

model: "Raid controller'
subsystem-vendor-id: 00001028
subsystem-id: 00001f51
vendor-id: 00001000
device-id: 00000073
name: 'pci1028,1f51'

________________________________
From: Eric Sproul [esproul at omniti.com]
Sent: Saturday, February 02, 2013 10:47 AM
To: Grant Albitz
Cc: omnios-discuss at lists.omniti.com
Subject: Re: [OmniOS-discuss] Perc h310 (mini)

>From the installer shell you can use prtconf -pv and look for "scsi" devices.  You can see the vendor and device ids within. We have pciutils (lspci & friends) available after install. There is an open ticket to get that added to the installer environments.

On Saturday, February 2, 2013, Grant Albitz wrote:

I know the perc h310 has been discussed before. From what I can tell you can use a h310 if you flash it to the LSI firmware. Does anyone know if you can get the h310 mini to work? It already supports jbod (as did the original perc h310). I have come across some posts saying you can use update_drv with other cards. I was not able to identify the card to try this. Is there a scanpci type of command in omnios? Any input would be appreciated. I can scrap the h310 mini if I have to, but the current chassis cabling will not work with any other card. I would live to keep it as is if possible.




-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://omniosce.org/ml-archive/attachments/20130202/c36d10f9/attachment.html>