[OmniOS-discuss] Perc h310 (mini)

Eric Sproul esproul at omniti.com
Sat Feb 2 17:21:29 EST 2013


pciex1000,73 is most likely going to be mr_sas. It's also likely supported
out of the box on bloody. Might be nice to see if that's the case if that's
possible.
On Feb 2, 2013 11:08 AM, "Grant Albitz" <GAlbitz at albitz.biz> wrote:

>  here is what it came back with, based on this any recommendations for
> what i can try? format shows no disks attached, i have 3 disks as jbodattached to the controller at the moment.
>
>
>
> compatible: 'pciex1000,73.1028.1f51.3' + 'pciex1000,73.1028.1f51' +
> 'pciex1000,73.3' + 'pciex1000,73' + pciexclass,010400' + 'pciexclass,0104'
> + 'pci1000,73.1028.1f51.3' + 'pci1000,73.1028.1f51' + 'pci1028,1f51' +
> 'pci1000,73.3' + 'pci1000,73' + 'pciclass,010400' + 'pciclass,0104'
>
> model: "Raid controller'
> subsystem-vendor-id: 00001028
> subsystem-id: 00001f51
> vendor-id: 00001000
> device-id: 00000073
> name: 'pci1028,1f51'
>  ------------------------------
> *From:* Eric Sproul [esproul at omniti.com]
> *Sent:* Saturday, February 02, 2013 10:47 AM
> *To:* Grant Albitz
> *Cc:* omnios-discuss at lists.omniti.com
> *Subject:* Re: [OmniOS-discuss] Perc h310 (mini)
>
>  From the installer shell you can use prtconf -pv and look for "scsi"
> devices.  You can see the vendor and device ids within. We have pciutils
> (lspci & friends) available after install. There is an open ticket to get
> that added to the installer environments.
>
> On Saturday, February 2, 2013, Grant Albitz wrote:
>
>>  I know the perc h310 has been discussed before. From what I can tell
>> you can use a h310 if you flash it to the LSI firmware. Does anyone know
>> if you can get the h310 mini to work? It already supports jbod (as did
>> the original perc h310). I have come across some posts saying you can
>> use update_drv with other cards. I was not able to identify the card to
>> try this. Is there a scanpci type of command in omnios? Any input would
>> be appreciated. I can scrap the h310 mini if I have to, but the current
>> chassis cabling will not work with any other card. I would live to keep it
>> as is if possible.
>>
>>
>>
>>
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://omniosce.org/ml-archive/attachments/20130202/e1e3a96d/attachment.html>


More information about the OmniOS-discuss mailing list