[OmniOS-discuss] reboot hangs on 'rebooting...'

[Garrett D'Amore]

On Oct 7, 2013, at 4:29 PM, Tom Robinson <tom.robinson at motec.com.au> wrote:

> Hi Garret,
> 
> Thanks for your message.
> 
> The host configuration is as follows:
> 
> Supermicro X9DRi-F
> 256GB RAM (16x Hynix 16GB ECC Reg. DDR3 1600MHz)
> 2 x Intel Xeon E5-2620
> 2 x Intel SSD 320 80GB (rpool)
> 4 x STEC Enterprise S842 200GB (ARC)
> 1 x STEC ZeusRAM 8GB 3.5" SAS SSD (ZIL)
> 1 x LSI SAS 9207-8i (internal drives)
> 1 x Intel Ethernet Server Adapter X520-DA2, Dual Port 10Gbps SFP+ Direct Attach Copper, PCI-e 2.0 5GT/s 1
> 2 x Mellanox ConnectX®-2 VPI
> 2 x LSI SAS 9207-8e (JBODS)

I'd be suspicious of the Mellanox cards.  Are these the hermon driver?  It looks like there is an attempt to do the right thing for those drivers, but… I don't know if I believe it all works properly.  The other cards should be fine.

	- Garrett

> 
> That is connected via external SAS to two JBODS containing 28 x 1TB disks each for mirrored zfs vdevs.
> 
> The output from prtconf -vp is attached as it's very long (2042 lines).
> 
> Kind regards,
> Tom
> 
> On 08/10/13 02:06, Garrett D'Amore wrote:
>> If you're seeing hangs like this, I would appreciate knowing the hardware configuration.  Prtconf -vp might be helpful.  Presumably this is the result of one or more devices not doing the right thing for quiesce(). 
>> 
>>  - Garrett
>> 
>> On Oct 7, 2013, at 4:34 AM, Narayan Desai <narayan.desai at gmail.com> wrote:
>> 
>>> This is caused by the system attempting to use fastboot on default reboot. We've disabled that and things seem to work properly; the following commands do the trick. (the first changes reboot not to use fastboot, the second causes the system to do a full reboot upon panic)
>>>  -nld
>>> 
>>> # svccfg -s "system/boot-config:default" setprop config/fastreboot_default=false
>>> # svcadm refresh svc:/system/boot-config:default
>>> # svccfg -s "system/boot-config:default" setprop config/fastreboot_onpanic=false
>>> # svcadm refresh svc:/system/boot-config:default
>>> 
>>> 
>>> 
>>> On Sun, Oct 6, 2013 at 11:26 PM, Tom Robinson <tom.robinson at motec.com.au> wrote:
>>> Hi,
>>> 
>>> I'm running OmniOS r151006 on a SuperMicro X9 motherboard.
>>> 
>>> when I do:
>>> 
>>> reboot -- -r
>>> 
>>> The system hangs on the 'rebooting...' message.
>>> 
>>> I've disabled Suspend and C-states in the BIOS. I had one successful 'reboot' but now it's hanging
>>> again.
>>> 
>>> Anyone have any clues on how to fix this?
>>> 
>>> Kind regards,
>>> 
>>> --
>>> 
>>> Tom Robinson
>>> IT Manager/System Administrator
>>> 
>>> MoTeC Pty Ltd
>>> 
>>> 121 Merrindale Drive
>>> Croydon South
>>> 3136 Victoria
>>> Australia
>>> 
>>> T: +61 3 9761 5050
>>> F: +61 3 9761 5051
>>> E: tom.robinson at motec.com.au
>>> 
>>> 
>>> 
>>> _______________________________________________
>>> OmniOS-discuss mailing list
>>> OmniOS-discuss at lists.omniti.com
>>> http://lists.omniti.com/mailman/listinfo/omnios-discuss
>>> 
>>> 
>>> _______________________________________________
>>> OmniOS-discuss mailing list
>>> OmniOS-discuss at lists.omniti.com
>>> http://lists.omniti.com/mailman/listinfo/omnios-discuss
>> 
> 
> <prtconf-vp.out>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://omniosce.org/ml-archive/attachments/20131007/a4c7c839/attachment-0001.html>