[OmniOS-discuss] SuperMicro Board Reboot Hang

[Matthew Mabis]

I have not tried yet, 

I was hoping there was a nicer way to do it in omni now i saw an older method which looked nasty I will change those settings and hopefully get that issue cleared! 

I could care less if it runs through the bios again heck i prefer it just incase the ECC RAM goes on the fritz... 

Thanks!

Matt Mabis



________________________________________
From: Paul Henson <paul.b.henson at gmail.com> on behalf of Paul B. Henson <henson at acm.org>
Sent: Wednesday, August 13, 2014 2:00 PM
To: Matthew Mabis
Cc: omnios-discuss at lists.omniti.com
Subject: Re: [OmniOS-discuss] SuperMicro Board Reboot Hang

On Wed, Aug 13, 2014 at 08:43:31PM +0000, Matthew Mabis wrote:

> Running a SuperMicro Board 16GB Ram soon to be updated... my first
> thought is it has something to do with SMB but i have also seen this
> happen when its Core Dumped b/c SMB crapped itself.  Basically the
> server will just sit at the Rebooting words and do nothing it requires
> physical intervention to reboot the box.

Did you try disabling fast reboot? I have a similar supermicro box that
wedges at reboot if fast reboot is enabled. Disabling fast reboot makes
it work, albeit at the cost of ripping through BIOS POST each reboot.
Seems a decent trade off ;).

# svccfg -s "system/boot-config:default" setprop config/fastreboot_default=false
# svccfg -s "system/boot-config:default" setprop config/fastreboot_onpanic=false
# svcadm refresh svc:/system/boot-config:default