[OmniOS-discuss] LACP Omnios , igb and C3750
Floris van Essen ..:: House of Ancients Amstafs ::..
info at houseofancients.nl
Fri Dec 12 17:10:36 UTC 2014
> On Dec 12, 2014, at 11:49 AM, Floris van Essen ..:: House of Ancients Amstafs ::.. <info at houseofancients.nl> wrote:
>
> Hi Dann,
>
> No problem, just happy you did :-)
>
> Right, so as might remember I had to reinstall because I was running
> bloody R11 , but there was a problem upgrading , so just did a fresh install Had to skip r12 because I simply couldn't install it, as there was a installer issue with r12...
>> Weird. I JUST updated the 012 install media thanks to illumos #5421, so you may want to try that again.
Did the installation 2 weeks ago, so guessing that that was before you did the changes.
No problem, I'll update to stable next release :-)
> So here we are again, running bloody r13 , fully updated :-)
>
> # dladm show-ether
> LINK PTYPE STATE AUTO SPEED-DUPLEX PAUSE
> e1000g1 current up yes 1G-f bi
> e1000g0 current up yes 1G-f bi
> igb0 current up yes 1G-f bi
> igb1 current up yes 1G-f bi
> igb2 current up yes 1G-f bi
> igb3 current up yes 1G-f bi
> # dladm show-link
> LINK CLASS MTU STATE BRIDGE OVER
> e1000g1 phys 1500 up -- --
> e1000g0 phys 1500 up -- --
> aggr0 aggr 1500 up -- e1000g0 e1000g1
> igb0 phys 1500 up -- --
> igb1 phys 1500 up -- --
> igb2 phys 1500 up -- --
> igb3 phys 1500 up -- --
>>Tis all looks sane. You're showing 1Gig, full dupliex, and up. This seems sane.
> # ifconfig -a
> lo0: flags=2001000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4,VIRTUAL> mtu 8232 index 1
> inet 127.0.0.1 netmask ff000000
> aggr0: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 2
> inet x.x.x.11 netmask ffffff00 broadcast x.x.x.255
> ether 0:30:48:d5:ec:94
And you have no problems pinging x.x.x.0/24 addresses? Or do you?
Non, actually connecting on that interface with ssh
> igb0: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 3
> inet 192.168.0.1 netmask ffffff00 broadcast 192.168.0.255
> ether a0:36:9f:2:c2:6c
> igb1: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 4
> inet 192.168.0.2 netmask ffffff00 broadcast 192.168.0.255
> ether a0:36:9f:2:c2:6d
> igb2: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 5
> inet 192.168.0.3 netmask ffffff00 broadcast 192.168.0.255
> ether a0:36:9f:2:c2:6e
> igb3: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 6
> inet 192.168.0.4 netmask ffffff00 broadcast 192.168.0.255
> ether a0:36:9f:2:c2:6f
>>Now I can totally see some potential confusion here. You've four addrs all in the same netstack and all with the same prefix. Now granted, they're different MAC addresses, but packets coming in on one interface may have their return traffic going out >>another.
>>If these are the problem, try using just one (igb0) for starters and "ifconfig igbX down" for 1, 2, and 3.
That is exactly what i did.. for each test brought the others down
Just to add, when doing a SH ARP on my cisco's, don't see the macs popping up, which is even more worring , no arps on a switch usually is very bad news
>>Also, I need to ask --> are either of your e1000g0's shared IPMI/host links? If so, disable the sharing feature in the BIOS. We don't cope with shared-with-IPMI NICs.
They are not... besides.. the e1000G's ( and their aggr) are working fully as expected.
To make it more interesting.. this was the same setup as I had on r11 , and then it did seem to work 100%
Dan
...:: House of Ancients ::...
American Staffordshire Terriers
+31-628-161-350
+31-614-198-389
Het Perk 48
4903 RB
Oosterhout
Netherlands
www.houseofancients.nl
More information about the OmniOS-discuss
mailing list