[OmniOS-discuss] LACP Omnios , igb and C3750

[Dan McDonald]

> 
>>> If these are the problem, try using just one (igb0) for starters and "ifconfig igbX down" for 1, 2, and 3.
> 
> That is exactly what i did.. for each test brought the others down
> Just to add, when doing a  SH ARP on my cisco's, don't see the macs popping up, which is even more worring , no arps on a switch usually is very bad news

And you've eliminated the switch as a problem?  I ask because of this recent push (don't let the commit date fool you, this went in in November):

commit b607c8a3bdb27d4fde6e3fc4bb6617a1d91bdca7
Author: Keith M Wesolowski <wesolows at foobazco.org>
Date:   Tue Aug 5 22:08:11 2014 +0000

    5337 igb/ixgbe mishandle raw packets if cable problem
    Reviewed by: Robert Mustacchi <rm at joyent.com>
    Reviewed by: Dan McDonald <danmcd at nexenta.com>
    Reviewed by: Jason King <jason.brian.king at gmail.com>
    Reviewed by: Garrett D'Amore <garrett at damore.org>
    Approved by: Richard Lowe <richlowe at richlowe.net>

 usr/src/uts/common/io/igb/igb_tx.c     | 10 +++++++---
 usr/src/uts/common/io/ixgbe/ixgbe_tx.c |  6 ++++--
 2 files changed, 11 insertions(+), 5 deletions(-)

This is the ONLY change since the February of 2014 support for I354 that's gone into the Intel GigE NIC code.

>>> Also, I need to ask --> are either of your e1000g0's shared IPMI/host links?  If so, disable the sharing feature in the BIOS.  We don't cope with shared-with-IPMI NICs.
> 
> They are not... besides.. the e1000G's ( and their aggr) are working fully as expected.
> To make it more interesting.. this was the same setup as I had on r11 , and then it did seem to work 100%

The only difference between 011 & 012 and 013 is the above commit.  You *could*, if you're feeling adventurous, swap out the "igb" driver in 013 with one from 012 or 011.  And if you unplumb all of the igbs (both in IPv4 and IPv6), you MAY be able to do it without rebooting.

Do you know which PCI ID your igb (it's an I350, right?) board is?  "prtconf -d | grep -i network" should be a quick way to show me that.

Dan