[OmniOS-discuss] Zpool export while resilvering?

[Schweiss, Chip]

On Wed, Jun 10, 2015 at 4:09 AM, Robert A. Brock <
Robert.Brock at 2hoffshore.com> wrote:

>  What did you use to flash them? Fwflash just gives an error about
> firmware file being too large.
>

Santools.

-Chip

>
>
> *From:* Schweiss, Chip [mailto:chip at innovates.com]
> *Sent:* 09 June 2015 21:25
> *To:* Robert A. Brock
> *Cc:* omnios-discuss
> *Subject:* Re: [OmniOS-discuss] Zpool export while resilvering?
>
>
>
> I went through this problem a while back.  There are some gotchas in
> getting them back online and firmware upgraded.   The is will not talk to
> the drive until it has its firmware upgraded or cleared from the fault
> database.
>
> This drives will not flash with multipath enabled either.
>
> I ended up clearing the fault manager's database, disabling it and
> disconnecting half the SAS cables to get them flashed.
>
> -Chip
>
>
>
> <snip>
>  2H Offshore Engineering Ltd | Registered in England No. 02790139 |
> Registered office: Ferryside, Ferry Road, Norwich NR1 1SW.
>
>
>  2H Offshore is an Acteon company specializing in the design, monitoring
> and integrity management of offshore riser and conductor systems. Acteon is
> a group of specialist international engineering companies serving the
> offshore oil and gas industry. Its focus is on subsea services spanning the
> entire life of field. For more information, visit www.acteon.com
>
>
>  The information in and/or accompanying this email is intended for the
> use of the stated recipient only and may be confidential and/or privileged.
> It should not be forwarded or copied nor should its contents be disclosed
> in any manner without the express consent of the sender/author. Any views
> or opinions presented are solely those of the author and do not necessarily
> represent those of 2H.
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://omniosce.org/ml-archive/attachments/20150610/cc3e2cd0/attachment.html>