[OmniOS-discuss] Can't get OmniOS to see LSI 1068e on SuperMicro X8DTL-3F

[Mark]

Check the PCI slot's speed setting in setup.
Many older cards need the slot speed lowered to work reliably.

I also seem to recall there may be different LSI firmware that supports 
different sas bus negotiation upper limits that can also cause issues.

Mark.


On 16/11/2015 12:24 p.m., Brian Hechinger wrote:
>
>> On Nov 15, 2015, at 6:11 PM, John D Groenveld <jdg117 at elvis.arl.psu.edu> wrote:
>>
>> In message <B888B845-43EB-4E5C-BDC8-EEB0B2F8C2EC at 4amlunch.net>, Brian Hechinger
>> writes:
>>> WARNING: /pci at 0,0/pci8086,340a at 3/pci159d,6 at 0 (mpt0):
>>>                 LSI PCI device (1000,59) not supported.
>>
>> Does mega_sas(7D) also fail to attach to 1000,59?
>
> It doesn’t complain but it also doesn’t work.
>
> and now fault manager is yelling about a PCIE device fault.
>
> So I’ll say no. :)
>
> -brian
>
> _______________________________________________
> OmniOS-discuss mailing list
> OmniOS-discuss at lists.omniti.com
> http://lists.omniti.com/mailman/listinfo/omnios-discuss
>