[OmniOS-discuss] Can't get OmniOS to see LSI 1068e on SuperMicro X8DTL-3F

[wonko at 4amlunch.net]

This is built into the motherboard. This isn't an add on card.

As far as I know (and let's be honest about how much I know here) this is a pretty vanilla firmware. It's the SuperMicro provided one.

-brian

> On Nov 16, 2015, at 02:43, Mark <mark0x01 at gmail.com> wrote:
> 
> Check the PCI slot's speed setting in setup.
> Many older cards need the slot speed lowered to work reliably.
> 
> I also seem to recall there may be different LSI firmware that supports different sas bus negotiation upper limits that can also cause issues.
> 
> Mark.
> 
> 
>> On 16/11/2015 12:24 p.m., Brian Hechinger wrote:
>> 
>>> On Nov 15, 2015, at 6:11 PM, John D Groenveld <jdg117 at elvis.arl.psu.edu> wrote:
>>> 
>>> In message <B888B845-43EB-4E5C-BDC8-EEB0B2F8C2EC at 4amlunch.net>, Brian Hechinger
>>> writes:
>>>> WARNING: /pci at 0,0/pci8086,340a at 3/pci159d,6 at 0 (mpt0):
>>>>                LSI PCI device (1000,59) not supported.
>>> 
>>> Does mega_sas(7D) also fail to attach to 1000,59?
>> 
>> It doesn’t complain but it also doesn’t work.
>> 
>> and now fault manager is yelling about a PCIE device fault.
>> 
>> So I’ll say no. :)
>> 
>> -brian
>> 
>> _______________________________________________
>> OmniOS-discuss mailing list
>> OmniOS-discuss at lists.omniti.com
>> http://lists.omniti.com/mailman/listinfo/omnios-discuss
> 
> _______________________________________________
> OmniOS-discuss mailing list
> OmniOS-discuss at lists.omniti.com
> http://lists.omniti.com/mailman/listinfo/omnios-discuss