[OmniOS-discuss] Seagate 4k HDD model ST4000NM0085

[Daniel D. Gonçalves]

I have a problem with Seagate 4k HDD model ST4000NM0085, my controller 
M1015 doesn't detect the hd, only onboard SATA, but not ready to work.

When i tried:
echo "::walk sd_state | ::grep '.!=0' | ::print struct sd_lun un_sd | \
   ::print struct scsi_device sd_inq | ::print struct scsi_inquiry \
   inq_vid inq_pid" | mdb -k

Doesn't show the HDD model ST4000NM0085.

On dmesg with onboard SATA:
Mar  5 19:41:05 storage02  SATA device detected at port 5
Mar  5 19:41:05 storage02 genunix: [ID 663010 kern.info] 
/pci at 0,0/pci8086,7270 at 1f,2 :
Mar  5 19:41:05 storage02 genunix: [ID 761595 kern.info]        SATA 
disk device at port 5
Mar  5 19:41:05 storage02 genunix: [ID 846691 kern.info] model 
ST4000NM0085-1YY107
Mar  5 19:41:05 storage02 genunix: [ID 693010 kern.info] firmware NN02
Mar  5 19:41:05 storage02 genunix: [ID 163988 kern.info] serial 
number             ZC101MCH
Mar  5 19:41:05 storage02 genunix: [ID 594940 kern.info] supported features:
Mar  5 19:41:05 storage02 genunix: [ID 981177 kern.info] 48-bit LBA, 
DMA, Native Command Queueing, SMART, SMART self-test
Mar  5 19:41:05 storage02 genunix: [ID 996592 kern.info]        SATA 
Gen3 signaling speed (6.0Gbps)
Mar  5 19:41:05 storage02 genunix: [ID 349649 kern.info] Supported queue 
depth 32
Mar  5 19:41:05 storage02 genunix: [ID 349649 kern.info] capacity = 
976754646 sectors

On dmesg with M1015 controller not show nothing.

Is there anything I should consider?

Thanks,
Daniel



---
Este email foi escaneado pelo Avast antivírus.
https://www.avast.com/antivirus