[OmniOS-discuss] Seagate 4k HDD model ST4000NM0085

[Dan McDonald]

> On Mar 5, 2017, at 5:53 PM, Daniel D. Gonçalves <daniel at dgnetwork.com.br> wrote:
> 
> I have a problem with Seagate 4k HDD model ST4000NM0085, my controller M1015 doesn't detect the hd, only onboard SATA, but not ready to work.
> 
> When i tried:
> echo "::walk sd_state | ::grep '.!=0' | ::print struct sd_lun un_sd | \
>  ::print struct scsi_device sd_inq | ::print struct scsi_inquiry \
>  inq_vid inq_pid" | mdb -k
> 
> Doesn't show the HDD model ST4000NM0085.
> 
> On dmesg with onboard SATA:
> Mar  5 19:41:05 storage02  SATA device detected at port 5
> Mar  5 19:41:05 storage02 genunix: [ID 663010 kern.info] /pci at 0,0/pci8086,7270 at 1f,2 :
> Mar  5 19:41:05 storage02 genunix: [ID 761595 kern.info]        SATA disk device at port 5
> Mar  5 19:41:05 storage02 genunix: [ID 846691 kern.info] model ST4000NM0085-1YY107
> Mar  5 19:41:05 storage02 genunix: [ID 693010 kern.info] firmware NN02
> Mar  5 19:41:05 storage02 genunix: [ID 163988 kern.info] serial number             ZC101MCH
> Mar  5 19:41:05 storage02 genunix: [ID 594940 kern.info] supported features:
> Mar  5 19:41:05 storage02 genunix: [ID 981177 kern.info] 48-bit LBA, DMA, Native Command Queueing, SMART, SMART self-test
> Mar  5 19:41:05 storage02 genunix: [ID 996592 kern.info]        SATA Gen3 signaling speed (6.0Gbps)
> Mar  5 19:41:05 storage02 genunix: [ID 349649 kern.info] Supported queue depth 32
> Mar  5 19:41:05 storage02 genunix: [ID 349649 kern.info] capacity = 976754646 sectors
> 
> On dmesg with M1015 controller not show nothing.
> 
> Is there anything I should consider?

1.) You're not saying which revision of OmniOS you're using.

2.) The M1015... is it FW flashed to look like any other LSI 920x board?  (Put another way, are you using mpt_sas?)  If not, how does this board show up to the system?

Dan