[OmniOS-discuss] disable acpi in loader.conf

[Jürgen Bereuter]

found the solution:
create file /boot/loader.conf and add this line
boot-args=''-B acpi-user-options=0x2''

thats it




> Am 30.05.2018 um 09:37 schrieb Jürgen Bereuter <jub at matchcut.at>:
> 
> Hello,
> i am using a HPE Proliant Gen10 Microserver, i installed omnniosce bloody (omniosce-bloody-20180509.usb-dd, i had to disable acpi). I am not sure, if i am using the new bootloader, but i think so. I should now disable acpi, but i did not find the right config file (/boot/loader.conf: acpi=off). 
> I tried to switch to grub, but there is also an error message:
> 
> sudo installgrub -fm /boot/grub/stage1 /boot/grub/stage /dev/rdsk/c2t0d0
> open: No such file or directory
> Unable to gather device information for /dev/rdsk/c2t0d0
> 
> The disk is s SSD, with an EFI partition/label, configured at installation as a rpool.
> 
> When i disable the acpi in the boot options manual omniosce boots up without a problem, i cannot make it permanent after a reboot.
> 
> thanks! jürgen
> _______________________________________________
> OmniOS-discuss mailing list
> OmniOS-discuss at lists.omniti.com
> http://lists.omniti.com/mailman/listinfo/omnios-discuss

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://omniosce.org/ml-archive/attachments/20180530/dd696bca/attachment.html>